BS-GS20/BS-GS20P Series Firmware Version 1.0.3.32

Name:		BS-GS20/BS-GS20P Series Firmware
Version:	1.0.3.32
Filename:	bsgs20-10332.zip
Size:		5,163,593 Bytes
Date:		May 18, 2017
Platform:	Windows computer
Models:		BS-GS2008/BS-GS2016/BS-GS2024/BS-GS2048/BS-GS2008P/BS-GS2016P/BS-GS2024P
Copyright:	Buffalo Inc.
Distribution:	ZIP archive
Condition:	No reprinting allowed.
Manual:		User manual on web

---------------------
[Description]
This firmware (version 1.0.3.32) is for the BS-GS20/20P series only. Do not use it for any other product.

[How to Update]
For instructions on how to update, refer to the user manual available from the Buffalo website.
Do not unplug the power cable while updating.

Note: After updating, clear your browser cache, otherwise the new functions may not be displayed correctly on your browser.

[Release Notes]
1.0.3.32
 -Fixed the issue where if all members of VLAN1 had been assigned as tag members, they would automatically become untag members after the switch reboots.

1.0.3.31
 - Fixed the issue where DHCP packets were blocked when DHCP snooping is enabled in privacy separator mode.
 - Fixed the issue where the switch stopped working when STP is enabled in privacy separator mode.
 - Fixed the issue where the communication speed got slow when using DTCP relay.
 - Fixed minor issues.

1.0.3.29
 - Fixed the issue where the switch hanged up when the VLAN mode was switched from "Privacy Separator" to "VLAN Settings".
 - Fixed the issue where the date and time could not be acquired from an SNTP server just after the switch has been turned on while the switch's IP address was set to be assigned by the DHCP server.
 - Fixed the issue where the FQDN entered into the SNTP server settings form became an IP address when the FQDN was resolved to the IP address.

1.0.3.27
 - Added the following functions:
  - SNMPv3
  - DiffServ IPv4/IPv6
  - IPv6 address setting
  - Ping IPv6
  - IGMPv3 snooping
  - MLDv1/v2 snooping
  - Multicast filtering
  - IPv6 ACL
  - Multiple spanning tree
  - DHCP option 82
  - DHCP rate limit
  - DHCP table
 - Fixed the issue where the DHCP offer/ack/nak was discarded when both DHCP snooping and 802.1X authentication were in use at the same time.
 - Fixed the issue where the VLAN status was not changed after 802.1X authentication when guest VLAN is in use.
 - Fixed the issue where port trunking did not work properly on ports 15 and 16 for the BS-GS2016 and BS-GS2016P models.
 - Fixed the issue where the wireless devices sometimes could not access other networks when the access points connected to BS-GS on layer 3 mode were connected to each other.
 - Fixed some text strings.

1.0.2.17
 - Fixed the issue where RADIUS, SNMP, NTP, syslog, and WLS-ADT/BN-ADT did not work when DHCP snooping was enabled.

1.0.2.16
 - Fixed the issue where a memory leak occurred when DHCP snooping was enabled.

1.0.2.15
 - Added the following functions:
 - L3 mode
 - Static routing
 - ARP table
 - Guest VLAN and dynamic VLAN
 - MAC address conversion (dynamic MAC addresses can be added to the static MAC filtering list)
 - Automatic SSL certificate creation
 - SSL certificate deletion
 - DHCP relay
 - STP/RSTP port path cost automatic assignment
 - Traffic control's ingress/egress bandwidth limitation
 - IGMP querier
 - Changed the number of steps for the fan's rotation frequency to 3 (for BS-GS2016P and BS-GS2024P only).
 - Fixed the issue where a memory leakage occurred in all management VLANs except VLAN 1.
 - Separated the MAC filtering settings page into dynamic MAC filtering and static MAC filtering sections.
 - Changed the display of the RADIUS authentication status.
 - Improved the MAC address table to confirm the authenticated devices.
 - Improved the PoE profile settings page.
 - Changed the range of port trunk's system priority to 1-65535.
 - Improved the display of the ACL status.
 - Fixed the issue where the configured flow control settings were not saved.
 - Fixed the issue where some invalid characters can be used in ACL wizard (only alphanumeric characters and symbols can be used).
 - Fixed some text strings.

1.0.0.20
 - Improved the switch's stability.
 - Fixed the interface MIB information.
 - Minor web UI modifications.

1.0.0.14
Initial release