HD-WLU3/R1,HD-WHU3/R1 Series Firmware Updater (For Mac) Version 1.00

HD-WLU3/R1,HD-WHU3/R1 Series Firmware Updater (For Mac) Version 1.00
Name:			HD-WLU3/R1,HD-WHU3/R1 Series Firmware Updater
Version: 		1.00
Filename: 		hd-wxu3_mac_rev100.dmg
Size:	 		10,518,528 Bytes
Date:	 		February 12, 2015
Compatible Device:	Mac
Compatible OS:	OS X 10.4-10.10
Models:	 	HD-WLU3/R1, HD-WHU3/R1 series
Copyright:	 	Buffalo Inc.
Distribution: 	ZIP archive
Condition: 		No reprinting allowed.

[Introduction]
This software is the firmware update utility for the HD-WLU3/R1 and HD-WHU3/R1 series.

If the current firmware version is "V03L01R04-10:1","V03L01R05-10:1","V03L01R06-10:1" or "V03L01R07-10:1", the firmware must be updated.
    To confirm the current firmware version:
      1. Open the updater.
      2. Check "Current version" displayed on the window.

[How to Update]
1. Connect the HD-WLU3/R1 or HD-WHU3/R1 to your Mac.
2. Double-click "hd-wxu3_mac_rev100.dmg".
3. Double-click "hd-wxu3_mac_rev100" disk.
4. Double-click "WxU3_UP_MAC" to open the updater.
    If the firmware is the latest version, "The connected USB drive already has the latest firmware" message will appear.
   If you see such a message, close the updater and continue using the product without updating.
5. Click [Update].
6. Wait until the update finishes. When the update finishes, a message will appear.
   Do not disconnect the USB cable or AC adapter while updating, otherwise the drive may become unusable.

[Notes]
 - Back up the data on your HD-WLU3/R1 or HD-WHU3/R1 series drive before updating.
 - If you have multiple HD-WLU3/R1 or HD-WHU3/R1 series drives, connect it to your Mac and update its firmware one by one.
 - Before the update starts, disconnect any other USB devices (except mouse and keyboard) and connect only one drive at a time.

[Release Notes]
Version 1.00 Initial release
  Firmware version: V03L01R08-10:1

  Bug Fixes:
    - Fixed the issue where HD-WLU3/R1 or HD-WHU3/R1 did not boot properly when the hard drive fails.
    - Fixed the issue where the internal temperature monitor did not work correctly when the PC reboots or recovers from hibernation mode.
    - Fixed the issue where HD-WLU3/R1 or HD-WHU3/R1 was not recognized after rebooting the Mac device the drive was connected to.