TS5010 and TS3010 Series Firmware Updater for Mac Version 3.43 Name TS5010 and TS3010 Series Firmware Updater for Mac Version 3.43 File ts5010_3010_series-3.43_fwmac.dmg.zip Size 478,551,463 bytes Date November 28, 2017 Platform Intel Mac OS macOS 10.9 or later Models TS5210DN, TS5210DF, TS5410DN, TS5410RN, TS5810DN, TS51210RH, TS3210DN, TS3410DN, TS3410RN Copyright Buffalo Inc. Distribution .ZIP archive Condition Re-distribution is not allowed. Manuals Quick setup guide, user manual This product uses GPL/LGPL applicable software and you are welcome to keep, modify, and redistribute the source code. Please ask our technical support representatives about modified GPL, applicable modules, and how to deliver them. You may be charged for the delivery cost. [Software Description] This software will update the TS5010 and TS3010 series TeraStations’ firmware to version 3.43. If your unit’s firmware is already version 3.43 or later, you don’t need this update. [How to Verify the Firmware Version] Select your TeraStation from NAS Navigator2. The firmware version is displayed on the bottom right corner of the window. [Before Updating the Firmware] - Do not turn off the TeraStation until the firmware update is complete and the “finished” message is displayed. - Disconnect iSCSI volumes using the iSCSI initiator before updating the firmware. [Notes] - Make sure the TeraStation’s Ethernet frame size is set to a value smaller than that of the hub or router. Larger frame sizes may not allow data to transfer to the TeraStation properly. - This firmware will send your usage information to Buffalo automatically. The usage information may include your TeraStation series name, firmware version, some settings such as the number of shared folders, some drive information such as S.M.A.R.T., and usage environment such as the number of client PCs. None of the collected information contains your personal data such as usernames and passwords. Buffalo will only use the collected information to improve future firmware updates and no other purposes. To disable this function, open Settings after updating the firmware to this version, then navigate to “Management” - “Update” - “Edit” and disable “Update Notification”. For more detailed information, refer to the user manual of your TeraStation model. - Depending on your TeraStation model and its firmware version, saved settings cannot be applied from a USB drive that contains saved settings from a unit running an earlier firmware version as listed below. In such a case, create the settings restoration USB drive again using a unit running the latest firmware version. TS5810DN series TeraStations: Untransferable settings from the USB drive are created from units running firmware version 3.12 or earlier to units running firmware version 3.20 or later TS51210RH series TeraStations: Untransferable settings from the USB drive are created from units running firmware version 3.00 or earlier to units running firmware version 3.02 or later TS5210DN, TS5210DF, TS5410DN, TS5410RN series TeraStations: Untransferable settings from the USB drive are created from units running firmware version 3.00 or earlier to units running firmware version 3.03 or later - Do not update the firmware from version 3.11 or earlier to 3.11 or later if the TeraStation is a TS51210RH series model and two UPS devices are connected to it. If unit has been updated already, reconfigure the UPS settings. - If you are using firmware version 3.04 or earlier and the backup source or destination folder name contains “%”, that backup job should be reconfigured after updating the firmware to version 3.12 or later. [How to Update the Firmware] 1. Extract the file you have downloaded. 2. Please execute “update”, refer to the screen instruction. [Firmware Release Notes] Version 3.43 [2017.11.28] Added and Modified Features [Cloud Storage] - Modified so that a region can be selected when configuring settings with Amazon S3. If you can’t access a bucket and its region is blank, try configuring the region. [Settings] - Improved the stability of Settings interface. Bug Fixes [SMB] - Modified to deal with a Samba programming vulnerability (CVE-2017-12150, CVE-2017-12151, CVE-2017-12163). [SFTP] - Fixed a bug where access-permitted groups could not access the shared folders. [Quota] - Fixed a bug where settings for a quota of 10,000 GB or larger could not be configured. [System] - Fixed a bug where a bootup process could not finish when shutting down and restarting the TeraStation. - Fixed a bug where a failed drive could not be dismounted properly. - Fixed a bug where settings could not be applied after the NAS volume size was expanded unless the TeraStation restarted. [Network] - Fixed a bug where some IP addresses and subnet masks could not be configured. [Shared Folders] - Fixed a bug where an NTFS-formated USB drive could configure access restrictions, although it shouldn’t be able to. Version 3.40 [2017.10.2] Added and Modified Features [Settings] - Thai languages have been added for display language. [iSCSI] - Improved the iSCSI service starting time after the network is restarted. Bug Fixes [WebAccess] - Fixed a bug where the WebAccess console could not be logged in to. Version 3.30 [2017.9.14] Added and Modified Features [WebAccess] - Subfolders’ access restrictions and access restrictions using domain users are now supported. - Owners and access permissions are now displayed on the detail panel of the WebAccess browser console. [Update Notification] - Usage information will now be sent automatically after updating the firmware. To prevent this, disable update notification. [Backup and Replication] - The entered backup device access key can now be displayed. [Settings] - Easy Admin is no longer available. Settings that were previously available on Easy Admin are now available from setup wizard. - Descriptions of system default users and groups are now available in every display language. - Modified the default file extension to CSV on the file selection window when importing users. Bug Fixes [System] - Fixed a bug where the TeraStation did not boot up when a system file was corrupted. The corrupted system file is now recovered automatically. - Fixed a bug where Settings could not be logged in to. [Replication] - Fixed a bug where a replication error occurs after failover was configured and then backup was sequentially configured. - Fixed a bug where a replication error occurs when disconnecting and reconnecting the USB drive after replication task was created. - Fixed a bug where macOS temp files such as .DS_Store were transferred to the replication target folder. - Fixed a bug where unavailable rsync-compatible devices were displayed in the available server list. [Email Notifications] - Fixed a bug where a notification email was not sent to certain email addresses. - Fixed a bug where importance levels for antivirus categories were not appropriate. - Fixed a bug where information for only one drive in the RAID array was contained in the notification email. [Network] - Fixed a bug where the connection was randomly disconnected. [RAID] - Fixed a bug where if a drive as part of a RAID array was disconnected while the TeraStation is on, and then the RAID array is removed and the TeraStation is turned off, then the drive is reconnected and the unit turned on, the status of all drives will show “Failed”. - Fixed a bug where the RAID array did not rebuild using a spare drive if a drive in the RAID array is disconnected while the TeraStation is off and then turned on. [Folder Setup] - Fixed a bug where a checkbox was not displayed for the created shared folders in the folder list so that the folders could not be selected. - Fixed a bug where a shared folder could not be created even if a name that contains an underscore is set for the folder name. [Power Management] - Fixed a bug where the “Wake Up TeraStation After Power Supply Recovers” option did not work on the TS3010 series TeraStations so that the unit did not boot up. - Fixed a bug where the UPS sync settings were not applied. [LCD Panel] - Fixed a bug where the LCD panel remained lit even while the TeraStation was off after drive setup was finished. [Workgroup/Domain] - Fixed a bug where if a specific number of local users and groups are on the TeraStation, an error message will appear when the TeraStation joins the Active Directory domain. [Backup] - Fixed a bug where a setting could be selected when editing a backup job even if that setting could not be configured originally. - Fixed a bug where a backup error was not displayed when the backup job was canceled due to changing any settings while the backup job was running. - Fixed a bug where a backup job failed because either backup source or destination NAS could not be recovered from standby mode even if both backup source and destination NAS has configured sleep mode. - Fixed a bug where the help link address of the backup error code was not correct. [SNMP] - Fixed a bug where iSCSI-related information was not displayed. [Failover] - Fixed a bug where a failover error message was displayed when canceling the maintenance mode if the TeraStation has too many files. - Fixed a bug where failover settings were not copied to the backup TeraStation properly. [Drive Setup] - Fixed a bug where recoverable firmware versions did not match with each model’s initial version. [SMB] - Fixed a bug where a shared folder could not be accessed by a “guest” user. - Fixed a bug where access permissions of the recycle bin folder or files in the recycle bin were not configured correctly if “Recycle Bin Permissions” was configured to “Administrator only”. [iSCSI] - Fixed a bug where a volume was not displayed if it is created with block I/O and WCE enabled. [Settings] - Fixed a bug where some messages were displayed in Japanese even if the display language was configured to English. - Fixed a bug where unnecessary help contents were displayed when a power user logs in Settings. - Fixed a bug where system-reserved addresses such as loopback address could be configured. - Fixed a bug where the displayed settings information did not match the settings actually configured on the UPS sync settings page. - Fixed a bug where some settings could not be changed if a shared folder was created by a power user. - Fixed other minor layout bugs. Version 3.20 [2017.7.10] Added and Modified Features - The TS5810DN series TeraStations are now supported. [RAID] - Modified to configure the RAID mode using the spare drive from the initial setup wizard. [Email Notifications] - Modified not to show the items that are not used for determining the drive error in a drive status notification email. - Modified to show the status by referring to the current S.M.A.R.T. values in a drive notification email. [S.M.A.R.T.] - Modified to show the status by referring to the current S.M.A.R.T. values in a drive notification email. Bug Fixes [SMB] - Modified to deal with a Samba programming vulnerability (CVE-2017-7494). - Fixed a bug where the TeraStation did not boot up when restarting if SMB is disabled. [Drives] - Fixed a bug where macOS temp files were not removed even if the “Delete macOS temp files” checkbox is selected during a drive check. - Fixed a bug where drive formatting failed if the drive contains the iSCSI volume created with “File I/O” for the “Backstore” option selected. - Fixed a bug where drive formatting failed while deleting a RAID array. [RAID] - Fixed a bug where the drive could not be rebuilt when rebuilding a RAID 1 array with RMM enabled. [UPS Sync] - Fixed a bug where the power error notification did not appear if a UPS power error occurred when UPS sync is configured. [Failover] - Fixed a bug where backup job information did not carry over properly to the replaced backup TeraStation during failover. [Email Notifications] - Fixed a bug where the email notification settings were configured properly even if a test email failed to be sent. - Fixed a bug where a spare drive was labeled as “Dismount” in a drive status notification email. [Settings] - Fixed a bug where the contextual help was not displayed in the drive list window. - Fixed a bug where access restrictions for shared folders could not be configured by a power user via Easy Admin. [SNMP] - Fixed a bug where the following values could not be acquired on the TS5210DF series TeraStations. -nasSSDSMARTBadBlockCountValue -nasSSDSMARTBadBlockCountWorst -nasSSDSMARTBadBlockCountThresh Version 3.12 [2017.5.18] Added and Modified Features [Backup] - rsync-compatible NAS devices can now be used for backup. The shared folders in rsync-compatible NAS devices can be selected as the source and destination folders when backing up to/from the TeraStation. If the user and password on the rsync-compatible NAS device contain any non-alphanumeric characters, backup may not work properly. Using only alphanumeric characters for the username and password is recommended. [Subfolders’ Access Restrictions] - Modified to exclude the trashbox folder when running the actions of the subfolders access restrictions to the shared folder that contains the trashbox folder. To run the actions, select the trashbox folder itself. [RAID] - Modified to be able to select unformatted drives when creating a RAID array or changing the RAID mode. [iSCSI] - Improved to VMware-qualified level on the TS5010 series TeraStations. Refer to the products’ website for the officially announced certificate information. [Dropbox] - Modified to be compatible with the Dropbox API version 2. [IP Address] - Modified to add the option for delaying the restart of network services that occurs by triggering the LAN port’s link up/down. [Active Directory] - Modified to search for a domain controller using the IP address, DNS name, and computer name. - Modified to expand the number of acquirable domain users and groups from a maximum of 1000 to 10,000. [Replication] - Modified to use a backup device access key for a replication task. This access key is the same as the backup key that has already been used. [Failover] - Improved the security level. [Power Management] - Connecting two UPS devices is now supported on the TS51210RH series TeraStations. [Drive Setup Mode] - The I61 information message is now displayed when the TeraStation is in drive setup mode. [Settings] - Improved the security level. Bug Fixes [File Sharing] - Fixed a bug where file sizes were not displayed properly on Windows 10 via SMB connections. - Fixed a bug where an .exe file could not run in Explorer if the file was uploaded via WebAccess or AFP connections. [Subfolders’ Access Restrictions] - Fixed a bug where actions did not run for the first level files if “Do not apply to folders and files in the second level folder and beyond” is selected. [Drives] - Fixed a bug where the help for drive formatting was not displayed on Settings if the display language is configured to Japanese or English. - Fixed a bug where the drive bay status showed “Dismounted/Plugged” even if no drive is plugged. [RAID] - Fixed a bug where the drive bay status showed “Dismounted/Plugged” even if no drive was plugged in. - Fixed a bug where the status was not displayed properly when RAID 5 or 6 array is configured with RMM. [Web Services] - Fixed a bug where 1 GB or larger size files could not be uploaded to AmazonS3. - Fixed a bug where invalid folders were created if syncing files from the Dropbox folder. - Fixed a bug where about 1.5 GB or larger size files could not be downloaded from the Dropbox folder. - Fixed a bug where the error message was displayed blank when the error occurred during renaming the shared folder name that the folder is used for Dropbox Sync. - Fixed a bug where Dropbox Sync tasks disappeared if the tasks were configured using invalid proxy server settings. [Port Trunking] - Fixed a bug where the network connection became unavailable on the TS51210RH series TeraStation when disconnecting/reconnecting the Ethernet cable if port trunking is configured. [Backup] - Fixed a bug where the TeraStation could not be detected when configuring backup on another TeraStation if too many users and/or groups were added for access restrictions. [Replication] - Fixed a bug where the TeraStation could not be detected when configuring replication on another TeraStation if too many users and/or groups were added for access restrictions. - Fixed a bug where files may disappear if the second level folders in the same shared folder were configured as each replication source and destination folder. - Fixed a bug where a replication error was still detected after unsynced files were resynced and the error had disappeared. [Failover] - Fixed a bug where the TeraStation could not be detected when configuring failover on another TeraStation if too many users and/or groups were added for access restrictions. [Power Management] - Fixed a bug where the power supply stopped from the PET501J1C UPS device by Fuji Electric before the shutdown process completed. - Fixed a bug where the TeraStation did not recover from the E10 error message if disconnecting/reconnecting the serial cable with a serial connection UPS device. - Fixed a bug where the E10 error message occurred if UPS settings were configured using a serial connection UPS device. - Fixed a bug where the TeraStation may shut down again when the unit boots up while the power outage still continues. This is triggered if the UPS settings were configured that the TeraStation was shut down after the specified minutes passed during when power outage occurred. - Fixed a bug where the TeraStation did not shut down when the power failure occurred if the “Delay shut down until the number of iSCSI connections reaches zero” option is selected with the iSCSI switch is disabled. - Fixed a bug where the UPS settings were finished even if no UPS device was connected. - Fixed a bug where the E10 error message was displayed randomly if the TeraStation’s time was configured using previous time settings. [Sleep Timer] - Fixed a bug where the power LED did not blink while the TeraStation is in sleep mode. [Drive Setup Mode] - Fixed a bug where a drive error LED did not extinguish if the TeraStation boot up in drive setup mode while a drive error LED was glowing. [Settings] - Fixed a bug where Settings became inaccessible. - Fixed a bug where invalid error message was displayed if a non-admin user was logged in to Settings and a specific operation was made. Version 3.03 [2017.4.11] Added and Modified Features [System] - The TS5210DF series TeraStations are now supported. [Storage] - SSD TRIM is now implemented for the TS5210DF series. [SNMP] - S.M.A.R.T. information related to the SSD can now be acquired via SNMP. You may need to download the latest MIB file from the Buffalo website. Bug Fixes [File Sharing] - Fixed a bug where files written via SMB protocols could not be accessed by anyone other than the file owners if access restrictions of the subfolders were disabled. Version 3.02 [2017.3.13] Added and Modified Features - The TS51210RH series TeraStations are now supported. Version 3.00 [2017.2.16] Added and Modified Features [Virus Scan] - Trend Micro NAS Security is now supported. The antivirus will protect files in the shared folders including USB drives from virus infection. To activate this function, a license (sold separately) should be registered. [Access Restrictions] - Subfolders’ and subfiles’ access restrictions are now available. [Firmware Recovery] - The TeraStation now has recovery mode to recover the corrupted firmware when the unit doesn’t boot properly. The unit can enter recovery mode by turning it on while holding down the function button. [WebAccess] - Music files are now playable from browsers that don’t support flash player. [RAID] - Improved to reduce RAID rebuild and scan times. [USB Drives] - Following external USB drive models are now supported: HD-DT/R6 series HD-HT/R6 series [Dropbox] - Added to verify an SSL certificate for the proxy server. [Port Trunking] - Added “ALB” to the port trunking policy. It will distribute incoming and outgoing network packets’ traffic loads. [Backup, Replication, and Failover] - Subfolders’ access restriction settings can be inherited to the destinations. To inherit the settings, both sources and destinations should be the TS3010 series or TS5010 series TeraStations running firmware version 3.00 or later. - Improved failover could not be configured if all drives were not inserted. [Settings] - Improved the response speed when logging in. [System] - Improved the contents of system log. - Improved usability of display buttons on the TeraStation. Bug Fixes [NFS] - Fixed a bug where shared folder lists on adding NFS rules were not displayed properly if multiple shared folders for which NFS protocols are enabled were created. - Fixed a bug where a shared folder that contains multibyte characters in its name could not be accessed via NFS connections. Accessing shared folders whose names contain multibyte-character from Windows computers is not supported. [WebAccess] - Fixed a bug where a folder that contains a 4 GB or larger file could not be downloaded. [Drives] - Fixed a bug where the wrong drive number was informed as a drive failure in a notification email. - Fixed a bug where the bootup process took time when disconnecting a drive while the TeraStation is off and it is powered on. - Fixed a bug where the I31 error message did not disappear after configuring a drive as a spare drive using the function button. [RAID] - Fixed a bug where a spare drive was wrongly displayed as failed on Settings even if the drive is not malfunctioning. - Fixed a bug where the I46 and I47 error messages did not disappear after configuring the unit to RAID 5 using RMM. [USB Drives] - Fixed a bug where NAS Navigator2 shows an XFS-formatted USB drive as unformatted. [Network] - Fixed a bug where NTP settings became disabled automatically when the initial setup was made under the environment that the TeraStation could not access to an NTP server. [SNMP] - Fixed a bug where firmware update value was wrong which were gotten by SNMP. [Backup, Replication, and Failover] - Fixed a bug where canceled files remained when backup jobs or replication tasks were canceled. - Fixed a bug where the I33 error message was not displayed even if the replication destination was not reachable. - Fixed failover trigger. - Fixed a bug where the “Configuring failover...” message was not displayed when logging in to the backup unit’s Settings after restarting. [Time Machine] - Fixed a bug where shared folders which were not configured for Time Machine were displayed on macOS. [UPS] - Fixed a bug where UPS sync didn’t work after disconnecting and reconnecting a USB cable. Version 2.20 [2017.1.16] Added and Modified Features [Network] - A 10GbE port now supports 2.5GBASE-T and 5GBASE-T connections. Bug Fixes [Web Services] - Fixed a bug where multiple file uploads failed when files were saved in the sync source folder at the same time. [Replication] - Fixed a bug where I33 replication error accidentally occurred during periodic sync. [Usage Feedback Delivery] - Fixed a bug where the “enable” option was displayed as “disable” for languages other than English and Japanese. On the other hand, the “disable” option was displayed as “enable”. Version 2.10 [2016.11.16] Added Features [WebAccess] - WebAccess is a software utility for accessing files in the shared folder of your TeraStation from your computers or mobile devices through the Internet. [NFS (Network File System)] - NFS offers access to the shared folders of your TeraStation from NFS clients. [Proxy Server] - If you locate the TeraStation on a network that passes through a proxy server, configure the proxy server, then firmware updates from Settings will work. [Replication] - Encryption and compression functions are now available during data transfer. Encrypted data will be transferred securely on the network. Compressed data will ease network loading. [Send Usage Feedback to Buffalo] - This will send your usage information to Buffalo automatically for product quality improvement. It is enabled by default. [Power Management] - The “Last State” option is now available. When you select “Use last state”, the TeraStation will revert to the state before a power failure occurred, power-on or -off. [Beep Alerts] - You can now configure the triggers to beep. [Front Panel Settings] - You can now configure the settings of LCD and brightness of LCD and LEDs. [Compatible UPS] - USB-compatible UPS devices by Fuji Electric are now available. Modified Features [Settings] - Added the “RAW Value” row into the S.M.A.R.T. information page. - Modified the label from “Frame Size” to “MTU”. You can configure the desired MTU size. [File Sharing] - Improved stability. [I’m here] - Modified the LED blinking trigger when sending the “I’m here” packets from all LEDs to only the info LED. Bug Fixes [Settings] - Fixed a bug where Settings displayed in gray. - Fixed a bug where RMM could not be enabled while RAID 6 is configured. - Fixed a bug where the notification message was not displayed when opening Settings using unsupported browsers on Windows XP and Windows Server 2003. [Shared Folders] - Fixed a bug where a shared folder became public to anyone when configuring the domain group read and write access from shared folder settings page and changing access restrictions to no access from domain group settings page. [Quota] - Fixed a bug where shared folder could not write any data after the quota alert capacity had been exceeded for a week. [FTP] - Fixed a bug where the shared folders could not be accessed via FTP if access restrictions configured by a specific number of groups were enacted and the TeraStation was restarted. [RAID] - Fixed a bug where a spare drive entered degraded mode when booting. - Fixed a bug where the total RAID array capacity did not expand when adding a drive to the RAID array using RMM. [LVM] - Fixed a bug where Block I/O volume created on drive 2 disappeared when enabling LVM to the RAID array constructed by drive 3 and 4. [Network] - Fixed a bug where the default gateway and DNS settings were cleared. - Fixed a bug where an unnecessary reply packet was returned when UPnP was detected. [Backup] - Fixed a bug where the “A system error occurred.” message was displayed and could not change the backup job settings. [Failover] - Fixed a bug where configuring failover failed. [Email Notifications] - Fixed a bug where blank emails were sent. - Fixed a bug where some notification emails were detected as spam by a mail server. [Sleep Timer] - Fixed a bug where TeraStation shutdown via the sleep timer was canceled when disconnecting and connecting the USB cable. [Configuration Migration] - Fixed a bug where the “Drive/Array” information of the shared folder created by cloud storage on shared folder settings page was migrated. - Fixed a bug where admin group’s email address was not migrated. - Fixed a bug where config migration failed from TS-XHL series. [Boot Authentication] - Fixed a bug where iSCSI volumes became uneditable or undeletable if iSCSI volume already existed when configuring boot authentication. You must back up data in iSCSI volumes before configuring boot authentication. [Info/Error] - Fixed a bug where the I18 message did not disappear. - Fixed a bug where the E22 error occurred when disconnecting a drive constructed in the RAID array and booting the TeraStation. Version 2.03 [2016.10.4] - First release.