TS6000 Series Firmware Updater for Mac Version 5.10 Name TS6000 Series Firmware Updater Version 5.10 File ts6000_series-5.10_fwmac.dmg.zip Size 549,810,631 bytes Date December 04, 2019 Platform Intel Mac OS macOS 10.9 or later Models TS6200DN, TS6400DN, TS6400RN Copyright Buffalo Inc. Distribution .ZIP archive Condition Re-distribution is not allowed. Manuals Quick setup guide, user manual This product uses GPL/LGPL applicable software and you are welcome to keep, modify, and redistribute the source code. Please ask our technical support representatives about modified GPL, applicable modules, and how to deliver them. You may be charged for the delivery cost. [Software Description] This software will update the TS6000 series TeraStations’ firmware to version 5.10. If your unit’s firmware is already version 5.10 or later, you don’t need this update. [How to Verify the Firmware Version] Select your TeraStation from NAS Navigator2. The firmware version is displayed on the bottom right corner of the window. [Updating Firmware] • Do not turn off the TeraStation until the firmware update is completed and the “finished” message is displayed. • Disconnect iSCSI volumes using the iSCSI initiator before updating the firmware. [Notes] • Make sure the TeraStation’s MTU size is set to a value smaller than that of the hub or router. Larger MTU sizes may not allow data to be transferred to the TeraStation properly. • This firmware will send your usage information to Buffalo automatically. The usage information may include your TeraStation series name, firmware version, some settings such as the number of shared folders, some drive information such as S.M.A.R.T., and usage environment such as the number of client PCs. None of the collected information contains your personal data such as usernames and passwords. Buffalo will only use the collected information to improve future firmware updates and no other purposes. To disable this function, open Settings after updating the firmware to this version, then navigate to “Management” > “Update” > “Edit” and disable “Update Notification”. For more detailed information, refer to the user manual of your TeraStation model. • If settings are initialized with an iSCSI volume that had been created using an LVM-enabled drive or array, that iSCSI volume mode may be displayed as “NAS”, instead of “iSCSI” on the NAS volume list. Even if in such a case, the iSCSI volume remains accessible via the iSCSI initiator. [For Customers Using Replication] To securely copy your data via replication, a backup device access key must be configured for the replication target. Please make sure you have installed the latest firmware downloaded from the Buffalo website onto your TeraStation and verify that a backup device access key has been configured on the replication target folder for any configured replication jobs. Refer to the “Replication” section in the user manual of your TeraStation model for the procedure to configure a backup device access key to the replication target folder. If you are replicating devices over different subnets or through NAT abstraction, using a VPN is recommended for network security. [How to Update the Firmware] 1. Extract the file you have downloaded. 2. Execute “update”, then refer to the on-screen instructions. [Firmware Release Notes] Version 5.10 [2019-12-04] Added and Modified Features [Antivirus] • Now includes “Trend Micro NAS Security” virus scanning software. The antivirus software will protect files in the shared folders, including files on USB drives, from virus infection. To activate this function, a license (sold separately) should be registered. Bug Fixes [Power Management] • Fixed a bug where if the UPS cable became disconnected, the disconnection error did not disappear even after the UPS cable was reconnected. [iSCSI] • Fixed a bug where iSCSI settings page could not be opened. [SNMP] • Fixed a bug where the device’s firmware version and serial number could not be acquired. [Remote Management Service] • Fixed a bug where Remote Management Service could not display the device’s firmware version and serial number. Version 5.06 [2019-10-17] Bug Fixes [System] • Modified to patch vulnerabilities (CVE-2018-13318, CVE-2018-13319, CVE-2018-13320, CVE-2018-13321, CVE-2018-13322, CVE-2018-13323, and CVE-2018-13324). Added and Modified Features [Remote Management Service] • Now supports the new device monitoring service, “Remote Management Service”. (This service is only available in the North America region.) Version 5.00 [2019-06-21] • Initial release.