* TeraStation X Series Firmware Updater(Mac) Ver.1.72

 Name         TeraStation X Series Firmware Updater(Mac)
 Version      Ver.1.72
 File         tsx_series-172_fwmac.dmg.zip
 Size         371,237,746 Bytes
 Date         January 22, 2018
 Platform     Intel Mac
 OS           Mac OS X 10.4 or later
 Model        TS-X2.0TL/R5, TS-X4.0TL/R5, TS-X6.0TL/R5, TS-X8.0TL/R5
              TS-WX1.0TL/R1、TS-WX2.0TL/R1、TS-WX1.0TL/1D
              TS-RX2.0TL/R5、TS-RX4.0TL/R5、TS-RX6.0TL/R5、TS-RX8.0TL/R5
              TS-XE2.0TL/R5、TS-XE4.0TL/R5、TS-XE6.0TL/R5、TS-XE8.0TL/R5
              TS-XH2.0TL/R6、TS-XH4.0TL/R6、TS-XH6.0TL/R6、TS-XH8.0TL/R6
 Copyright    Buffalo Inc.
 Distribution Distribution ZIP archive
 Condition    Re-distribution is not allowed.
 Manual       Quick Setup Guide
              Reference Guide
 This product uses GPL/LGPL applicable software and your are welcome to
 have, modify and redistribute these source codes.
 Please ask our technical support people about modified GPL, applicable
 module and how to deliver them. You may be charged for delivery cost.

[Software description]
This software is TeraStation X Series Firmware Update Utility to update unit firmware to Ver.1.72.
If your unit firmware is Ver.1.72 or later version, you do not have to use this utility.

*If the TeraStation became EM Mode, firmware update might recover the unit.

[How to confirm firmware version]
Select TeraStation X Series from NAS Navigator2 utility search screen.
The firmware version is displayed right and bottom corner in the status screen.
If the unit name shown TS-***-EM*** in the status screen, the TeraStation X Series becomes EM (Emergency) mode.

[Caution]
- Please consult you local representative if you experience malfunction problem cause by firmware update.
- Do not turn the unit off until complete messages appear. It might takes several minutes in the case.
- After Ver.1.51, due to adding online update features and error and information codes,
  when TeraStation detects the online update, the message "152:Unknown error occurred" is displayed
  depending on the version of the NAS Navigator2 you are using. 
  Please update to the latest NAS Navigator2. 
- Updating from Firmware version Ver1.10 or earlier may case time zone setting blank on the 
  web configuration screen after updating.   
  In such a case, set time zone properly.(This does not cause a gap of time.)

[How to use updater]
1. Extract the file you have downloaded.
2. Please execute "update", refer to the screen instruction.

[Notification]
- Make sure the TeraStation's Ethernet frame size is smaller than the hub or router's. Larger frame sizes may not transfer the data to the TeraStation correctly.
- Ethernet frame size on the TeraStation includes 14 bytes of header and 4 bytes of FCS.

[Firmware Release Note]
Ver.1.72 [2018.1.22]
Bug Fixes
[SMB]
 - Modified to deal with a Samba programming vulnerability (CVE-2017-15275).

Ver.1.71 [2017.7.3]
Bug Fixes
[SMB]
 - Modified to deal with a Samba programming vulnerability (CVE-2017-7494).
 
[Replication] 
 - Modified to use a backup device access key for a replication task. This access key is the same as the backup key that has already been used.

Ver.1.66 [2015.4.6]
Bug Fixes
 - Modified to deal with OpenSSL programming vulnerabilities (CVE-2014-3567 and CVE-2014-3568) that are also known as the POODLE (SSL3.0) vulnerability.
 - Modified to deal with Samba programming vulnerabilities (CVE-2015-0240, CVE-2014-3493, CVE-2014-0244, and CVE-2014-0178).
 - Fixed a bug where the initial settings of WebAccess may have failed.

Ver.1.65 [2014.11.5]
Modified Features
[Replication]
 - Modified so that the new page can add or delete multiple jobs at the same time.
 
Bug Fixes
[Replication]
 - Fixed a bug where a replication error occurred when too many files were copied to the replication source folder.
 - Fixed a bug where syncing the first file failed when replication was run after 8 hours without any file operations in the replication source folder.
 - Fixed a bug where replication didn't work properly if multiple replication jobs were added.

[Backup]
 - Fixed a bug where a shared folder in the another TeraStation's LVM volume could not be detected when creating a backup job.

[System]
 - Fixed a bug where a drive error was mistakenly detected if the TeraStation was working for a long time.
 - Fixed a bug where the LAN port LED extinguished for a few seconds, and the system became unstable or file transfers became slow if the Ethernet cable was disconnected from the TeraStation when replicating too many files.
 - Fixed a bug where the TeraStation could not be shut down using the power button when replicating too many files.
 - Fixed a bug where Settings was not accessible when replicating too many files.

Version 1.64 [2014.10.14]
Bug Fixes
 [System]
 - Modified to deal with Shellshock vulnerabilities from Bash programming that allowed remote attackers to execute arbitrary commands (CVE-2014-6271 and CVE-2014-7169).
 - Fixed the issue where auto power mode sets the TeraStation into sleep mode even while the computer with NAS Navigator2 installed is powered on.

Version 1.63 [2014.02.04]
Bug Fixes
 [Network]
 - Fixed a bug where the file attribute of php files changed to read-only when they were copied.

 [Replication]
 - Fixed a bug where a replication error was displayed when no replication task existed.
 - Fixed a bug where an error occurred when resyncing while copying files into the replication source folder.
 - Fixed a bug where resyncing replication failed if files with "%n" in their filename were included.
 - Fixed a bug where replication stopped when resynced.

 [Backup]
 - Fixed a bug where some files were not backed up when multiple files were backed up at once.

Version 1.62 [2013.11.19]
 Bug Fixes
　・Fixed the bug where the TeraStation will boot in the emergency mode (EM) if replication and sleep timer or auto power mode are enabled.

 * Modified Features
　・Replication events are no longer recorded to the system log. See the replication log for detailed replication events.

Version 1.61 [2013.09.30]
 Modified features
  - Updated replication:
      Improved performance when the multiple files are accessed on the replication target.
      Fixed the bug where replication failed when multiple files were deleted with the trash enabled.

 Bug fixes
 [WebAccess]
  - Fixed the bug where alphanumeric characters could not be used to log in from iOS 6.

 [Settings]
  - Fixed the bug where a folder whose name began with a number as the first character could not specified as a DFS link target.
  - Fixed the bug where shared folders that contained a similar folder name couldn't be selected as a backup folder.

 [System]
  - Fixed the bug where firmware updating failed via BN-ADT.
  - Fixed the false error when the UPS switched to battery power.
  - Fixed the bug where shared folders weren't accessible after a format failed.

 [Virus Check]
  - Improved the performance of opening Microsoft Office files while antivirus is enabled.

Version 1.60 [2013.05.23]
Note: This firmware update is only for TS-XEL/R5 series TeraStations. 

 Bug fixes
 [System] 
  - Fixed the bug where the TeraStation didn't boot properly with certain hard drives.

Version 1.59 [2013.03.13]
 Bug fixes
 [Settings]
   - Fixed vulnerability issues in Settings.
   - Fixed the bug where Settings didn't immediately show when a USB drive was dismounted.

 [System] 
  - Fixed the bug where log file is unable to access using the link to the log in shared folders.
  - Fixed the bug where files in "info" folder is unable to access on TS-XHL/R6, firmware version 1.58.

Version 1.58 [2013.01.24]
 Bug fixes
 [Virus Check]
  - The TeraStation can now shut down for manual antivirus scanning.
  - Fixed bug where Trend Micro NAS Security is deactivated when initializing on Settings.

 [Settings]
  - Settings are now available after a shared folder is deleted and then another menu is selected.

 [WebAccess]
  - Server certification now matches imported certification from settings.

 [Network]
  - Filenames with brackets ([ or ]) now work properly with FileZilla during FTP connections. 
  - Fixed the lighttpd security problem. (JVNDB-2011-003541)

 [Samba]
  - Active Directory (Windows Server 2008 and Windows Server 2008 R2) - Improved connectivity when TS-X series connects to Active Directory or PC access to TS-X series. The following issues have been fixed:
    1. PC cannot access to shared folder via IP address even though hostname works.
    2. After joining Active Directory, TS-X can't get domain users.
    3. Backup fails if TS-X is configured as backup target for Windows Server backup function.

 [Replication]
  - Fixed bug where replication stops when files or subfolders in replication source are deleted while recycle bin is on.

 Added and Modified Features
 [Network]
  - Added guest permission which can set permissions when writing files to NFS service on Settings.
  - File permission written via NFS now remain when "Ignored" is selected on guest permission. If "Forced" is selected, user ID and group ID should be 99.

* Ver 1.57 [2012.07.18]
 =Bug Fixes
  [System]
  - Fixed the problem that TeraStation freezes after unstable system condition when it runs 60 days or more continuously.
  - Fixed the problem that Mail Notification feature fails when TeraStation uses a specific mail server system.

  [Replication] 
  - Fixed the problem of replication failure with E26 error occurs when several file operations (such as rename or delete) are initiated during replication.

  [Network]
  - Fixed the Samba security problems (CVE-2012-1182).
  - Fixed the MySQL security problems (http://dev.mysql.com/doc/refman/5.0/en/news-5-0-96.html).
  - Fixed the PHP security problems (CVE-2011-1464, CVE-2011-1153, CVE-2011-1092, CVE-2011-0708, CVE-2011-0421).
  - Fixed the phpMyAdmin security problems (CVE-2011-2505, CVE-2011-2506).

  [Users/Groups]
  - Fixed the problem that TeraStation does not reboot properly when it joins the Active Directory environment with 9000 active directory users and 5000 groups.

* Ver 1.56 [2012.07.03]
 =Bug Fixes
  [System]
　- The "HDx Broken E30" error when going into sleep mode has been fixed.

* Ver.1.55 [2011.11.10]
 =Added and modified features
  [Backup]
  - Modified to notify I54 (backuptask0X_failure_info) when backup failed. 

  [System]
  - Supported Mac OS X v10.7 Lion 
    - Fixed the problem that the folder for which the access restriction was set could not be connected by AFP from Mac OS X v10.7 Lion.  
    - Fixed the problem that Time Machine backup could not be performed on Mac OS X v10.7 Lion. 
  - Supports Windows Server Backup. 
    The shared folder of the TeraStation can be now selected as a backup destination for the Windows Server Backup feature. 
  - Fixed the problem that the TeraStation could not be rebooted even if data were sent to the correct port on WakeOnLan feature depending on the contents of packets.  
  - Modified to be able to set to disable online update notification (I52). 
    If the notification is disabled, notification to NASNavi2, LCD and webUI login screen is not sent even if a new firmware is released. 
  - Modified to displayed to message of transmitting to the standby mode on the LCD when transmitting to the standby mode.   
  - Modified to detect and format 3 TByte external USB drive on the TeraStation. 
  - Fixed the problem that the array happened to be degraded if the TeraStation was shut down or rebooted while copying to the TeraStation using the Turbo copy.

 = Bug Fix
  [Replication] 
  - Fixed the problem that F/W could not be update or the wrong information was displayed if replication was configured.  
  - Fixed the problem that a file with consecutive "space" and "#" in its name in the main device was not properly synchronized to the backup device when copying that file.  
  - Fixed the problem that a file which was not reflected on the replication destination existed when uploading to the replication source by a specific FTP client when configuring replication. 
  - Fixed the problem that the warning was displayed and the copy could not be finished if a large amount of files was copied from the replication source on Samba when setting the replication. 

  [WebAccess]
  - Fixed the problem that the WebAccess features using UPnP could not be configured on specific routers.  

  [System]
  - Modified to deal with the Samba's vulnerability (CVE-2011-0719). 
  - Fixed the problem that the "recovery of the disk constitution information" mail was sent when booting the TeraStation if the spare drive was set.  
  - Fixed the problem that the time of the mail notification was not right. 
  - Fixed the problem that E30 (diskX_broken_error) was mistakenly sent when array was degraded and rebuilding. 
  - Fixed the problem that drive structure was still displayed as the array when deleting the array and changing back to the standard drive structure. 
  - Fixed the problem that the share folder in the TeraStation was not occasionally able to open when backing up to the TeraStation using a backup software provided by a third party. 
  - Fixed the problem that connecting to the TeraStation by Samaba caused an error if a full-byte character is used in DFS feature after Windows update. 
  - Fixed the problem that the USB drive connected to the TeraStation was not detected and you could not connect to the USB drive from file sharing service such as Samba after booting the TeraStation. 
  - Fixed the problem that IP address was set to 192.168.11.150 if you changed the Jumbo frame setting after configuring the port trunk. 
  - Fixed the problem that unplugging LAN1 or LAN2 may cause disconnection in the environment that LAN1 and LAN2 were connected to the same network. 
  - Modified to create the shared file name as "TMNAS" (the hidden folder which has access restriction) if array or drive which has the isolated folder was formatted while checking the viruses.  



* Ver.1.54 [2011.7.7]
 = Bug Fix
  [System]
  - Fixed the problem that malfunction notification (E30) for the drive that was configured as a spare drive when booting the TeraStation and the spare drive configuration was released on Firmware Ver1.53. 
    (This problem only occurs on Firmware Ver1.53. This does not happen if you are using other versions of firmware.）


* Ver.1.53 [2011.6.27]
 = Added and modified features
  [WebAccess]
  - The newest version of the WebAccess is now 3.4.  
  - Improved the interface when accessing from iPhone / iPad / iPod touch / Android. 
  - Changed and extended the supported devices and OS. 
    Refer to the following URL for details.
    http://buffalonas.com/manual/en/iphone00.html
  
  [Web Configuration]
  - Now Arabian, Finnish, and Turkish are supported to display in Web Configuration screen. 
  - Modified to be able to input the reserved address of the class B when inputting the IP address 
    in Web Configuration screen. 

 = Bug Fix
  [Backup]
  - Fixed the problem that the backup destination could not be found from the Web Configuration
    screen when the multiple shared folders whose backup destinations were enabled were existed.  
  - Fixed the problem that mail notification was occasionally failed when failing replication. 
  - Improved so that the replication error (E26) would not occur when rebooting   TeraStation/LinkStation which was set to the destination of the replication when configuring 
    replication. Improved the system to restart replication after rebooting it. 
  - Fixed the problem that the backup of Ethernet 2 was also disabled when disabling backup of 
    Ethernet 1 on the network service setting. 
  
  [WebAccess]
  - Fixed the problem that the WebAccess features using UPnP could not be configured on specific 
    routers.  
  - Fixed the problem that WebAccess configuration of the USB drive was set to default value when
    updating F/W in the F/W 1.10 or earlier. 
  
  [Web Configuration]
  - Fixed the problem that working condition error (E10) on UPS battery might occur when 
    configuration UPS in Web Configuration screen. 
  
  [System]
  - Fixed the problem that a malfunctioning drive could not be identified and then the device was into
    EM mode (recovery mode). 
  　When this occurs, updating to Ver.1.53 will notice the drive malfunction notification (E30) after
    system is rebooted. 
  - Fixed the problem that the RAID array resyncing (I17) notification would not be gone when 
    formatting drives after building RAID10.  


* Ver.1.52 [2011.5.18]
 = Bug Fix
  - Fixed the problem that updating firmware Ver1.51 for TS-XL and TS-RXL occasionally failed.
    When failing the update, E14(*1) is displayed. 
    To solve the problem, update it to Ver1.52.
    *1: The message "RAID Array1 E14 Can't Mount" or "RAID Array2 E14 Can't Mount" is displayed.  
  

* Ver.1.51 [2011.4.21]
 = Added and modified features
  - added the online update feature. 
    Now be able to check the newest firmware and run the firmware's update on Web Configuration
    Screen while the TeraStation can be connected to the internet. 
  - Added Eye-Fi feature. 
    Now be able to transfer pictures to the TeraStation via the Internet took on the digital camera 
    in which an Eye-Fi card manufactured was inserted. 
  - French, German and Chinese is now supported on the virus check configuration screen. 
  - Modified to display the error code E30 when a drive malfunctions.  
    Modified only to display E30 when a drive malfunctions from this version while multiple error codes 
    (E13, 15 and 23) was displayed traditionally. 
  - Now displayed errors (Exx) and status (lxx) occurring on the TeraStation on the Web Configuration 
    Screen. 

 = Bug Fix
  [Virus check feature]
  - Fixed the problem that the activation was failed even though the accurate serial number was
     entered from the [Management]-[Product License] on the Virus Check Configuration Screen 
    on the virus check feature. 
  - Fixed the problem that the message "splx_watchd_exec.sh： File delete or move event detected!" 
    on the system log on every 5 minutes when the virus check feature was enabled. 
  - Modified to output the correct host name because "localhost.localdomain" was displayed as 
    a host name in the log of the virus check feature on the system log when virus check feature
    was enabled. 

  [FTP]
  - Modified to compete with the vulnerability when FTP feature is enabled.  
    Fixed the problem that after a text file was append-sent with FTP feature, the files put-sent after that were also appended.  
  
  [Backup]
  - Fixed the problem that the replication was aborted on 1st of every month on 2:15 when configuring 
    the replication.  
  
  [Web Configuration Screen]
  - Fix the problem that all displayed in English even though the displayed language was set to Italian on
     the Web Configuration Screen. 
  - Fixed the problem that a user which contains a character "$" in a user name could not be added 
    as a group member.  
  - Fixed the problem that multiple users simultaneously logged in to the Web Configuration Screen and 
    changing a user's own password was failed.  
  
  [Web Access]
  - Fixed the problem that files with more than 500 Kbyte could not be downloaded on the Web Access 
    using Windows Internet Explorer. 
  
  [BitTorrent]
  - Fixed the problem that the values set on BitTorrent Download manage was set back to default 
    values when the TeraStation was rebooted. 
  
  [System]
  - Fixed the problem that when the TeraStation was booted or the array was degraded 
    or corrupted in the early morning of once a month on the environment that a spare drive is configured on the TS-XEL model. 
  - Fixed the problem that pressing the function button while the TeraStation was booted in EM mode 
    and a USB drive is connected deleted the data on next time the TeraStation was booted. 
  - Fixed the problem that the system was not booted on the time as set on the timer feature 
    if the time zone setting was other than "(UTC+09:00)".  
  - Fixed the problem that SFTP connection did not possibly work after recovering from the Timer ON/OFF feature.
  - Fixed the problem that the TeraStation was happened to be booted in EM mode when many   (approximately 1.5 million) file folders exist in shallow level in one shared folder. 
  - Now automatically repaired when the TeraStation was booted if the drive structure file 
    in the system was corrupted due to such as the sudden power outage. Traditionally data 
    was possibly deleted when the drive structure file was corrupted. 
  - Fixed the problem the TeraStation could not be booted when the system was corrupted. 
  - Modified the expression in the notified mail when the Read error occurred on a drive which was 
    not used in the array (a drive in the normal mode) or a USB drive. 
  - Fixed the problem that drive's Write error mail was sent when removing the drive. 
  - Fixed the problem that the message "Could not confirm the firmware of the TeraStation was
     overwritten." was displayed when updating the firmware.  
  - Fixed the problem that I11 would not be released just when the drive I11 was occurred was replaced. 
  - Fixed the problem that I12 was displayed while the array was not built. 
  - Fixed the problem that I11 was disappeared when rebooting the system on the environment that 
    I11 was displayed. 
  
  
* Ver.1.50 [2010.11.24]
  [System]
  - Fixed the problem that the backup was sometimes failed when the TeraStation was hung up during 
    backup when using Symantec backup Exec System Recovery from Symantec for TeraStation's 
    system backup. 
  - Fixed the problem that "HDx Error E23 HDx IS Faulty (x expresses the disk number)" was displayed 
    on LCD for a few seconds for the drive which was properly working when drive was malfunctioning 
    (RAID degrade). .
  - Fixed the problem that quarantined folder was created under an array which did not exist when 
    performing the drive complete format while using virus check function. 
  - Fixed the problem that "OperationMode I12 DEGRADE MODE" was notified even though it was not
     degrade mode when TeraStation was rebooted after the drive was malfunctioned (RAID degrade) 
    and rebuild was completed on the environment of the spare drive was set.  
  - Fixed the problem that "HDx Error E22HDx Can't Mount (x expresses the drive number)" was 
    noticed even though a drive was mounted after changing the drive set as a spare drive to the 
    standard drive.  
  
  
  [Samba]
  - Applied the patch which supports Samba's vulnerability. 
    (Samba remote DoS security problem (CVE-2010-3069)) 
  - Fixed the problem that a user name for which capital letters were used could not be automatically
     registered when using Delegate Authority to External SMB Server feature. 
  - Now supports the problem that the search on the TeraStation did not work for the hidden shared 
    folders. 
  
  [AFP]
  - Fixed the problem that AFP file copy was slow depending on the environment. 
     (*Improved only when a replication task did not exist. 
      If there is a replication task, delete it to improve it.)
  
  [Replication] 
  - Fixed the problem that the TeraStation was failed to reboot in the environment that many replication tasks were configured and many tasks (*) was deleted after that. 
    (*We have confirmed that this phenomenon happened when 40 replication tasks were configured on 
    the old version of firmware. )
  - Fixed the problem that "Replication E26 ReplicateFailure" was caused when executing the following 
    procedure. 
    1. Configure a replication task
    2. Copy hundreds of files to replication source
    3. Immediately delete replication task configured on 1 
    4. Reconfigure the task on 1
  
  [Virus check feature]
  - Modified to set Access Restriction to the readable because the quarantined virus could not be 
    deleted since the quarantined folder's access restriction was set to read only for admin group when 
    changing the disk configuration or formatting drives on model number TS-HL/R6 (VC) or when   virus check function was on. 
  - Modified to display the warning when activation did not work properly because the network was not
     configured correctly on the virus check configuration screen. 
  
  [BitTorrent]
  - Modified the behavior so that USB drive which did not exist as a BitTorrent download folder would 
    not set when setting BitTorrent download folder to the USB drive, and removing the USB drive when 
    turning off TeraStation and the TeraStation was rebooted again.
  - Fix the problem that BitTorrent configuration screen would not open when the TeraStation's 
    language setting while BitTorrent was enabled.
  
  [Web Configuration Screen]
  - Fixed the problem that a group name with 13 byte or more could not be registered. 
    (A group name with up to 20 byte can be registered)

* Ver.1.41 [2010.09.09]
  - Fixed the problem that the file system (XFS) error sometimes occurred after new drive was inserted
     and RAID was rebuilt because drive was degraded (malfunction) when using AID5. 
  - Solved the problem that TS-X series could not join NT domain when using F/W ver1.40. 
  - Solved the problem that establishing link was slow when static IP address was configured and it was 
    connected to Giga hub. 
  - Solved the problem that FTP connection could not be used when FTP settings were enabled for the
     large number of users. 
  

* Ver.1.40 [2010.08.09]
  [Virus check feature]
  - Equipped with "Trend Micro NAS Security" by Trend Micro and now virus check feature is now supported.   
    Please purchase the extended and prolong pack for virus check feature sold separately 
    (OP-TSVC-5Y, OP-TSVC-3Y, OP-TSVC-1Y) when you want to use virus check feature. 
  
  [Web Access]
  - WebAccess is upgraded to WebAccess 3.1.
    Supporting access from iPad, iPhone 4 and iOS 4 devices.
    Supporting access from HTC Magic, HTC Desire and Xperia X10.
    Several items selection by clicking Ctrl-key is available with all view.
    Renaming upload files is available when the file name is duplicated.
    Improving processing speed when multiple clients access LinkStation.
  
    For detail description of function, see http://buffalonas.com/manual/en/ .
  
  [System]
  - Fixed the problem that sorting by ascending or descending order does not work when searching by TeraSearch.
  - Fixed the problem that the replication failed when IP address of the replication destination is changed. 
  - Fixed the problem that changes to php.ini were not reflected on web server feature. 
  - Security vulnerability on Samba (CVE-2010-2063) is now taken care of. 
  - Fixed the problem that the TeraStation might not be able to be booted when SFTP function was effectively set
  - Fixed the problem that backup was failed when Tera/LinkStation on the network as a backup source was specified and the remote backup password is set. 
  - Fixed the problem that I'm here feature was not working from NasNavi2.
  - Fixed the problem that RAID was degraded since a disk was not recognized when booting. 
  
  [Web Configuration Screen]
  - Added the symbols that can be used for Administrator's password when joining the domain. 
    Available symbols - _ ( ) < > { } [ ] ; ~ / , ' ? | + =  | + =


* Ver.1.32 [2010.06.03]
  [UPS]
  - Add feature that shutting it down along with UPS that is connected to other TeraStation on the network.
  - Add the supported UPS models. 
  
  [SNMP]
  - SNMP is now supported. TeraStation can be browsed from the network management software which supports SNMP protocol. 
  
  [web Server, MySQL server]
  - The web server is now supported. 
  - MySQL server is now supported. 
  
  [Web Access]
  - New version of Web Access is now available. 
  
  [BitTorrent]
  - New version of BitTorrent is now available. 
  
  [Backup]
  - Fix the problem that backup is launched and TeraStation in standby status was restarted even though the schedule was not set.  
  - Fix the problem that folder name was not displayed on the list of backup source if folder size is 170 byte or more.
  
  [System]
  - Add the file formats which were searched on TeraStation. 
  - Remaining available space is now displayed properly when connecting HD-AVL manufactured by Buffalo to TeraStation.  
  - Change how to judge errors on a hard drive. If the hard drive's self diagnostic information included in smart information is "FAIL, the target drive is displayed as an error. 
  - Fix the problem that deleting a folder was failed and shared folders could not be temporarily accessed. 
  - Fix the problem that TeraStation repeatedly rebooted before it is completely booted when turn it on.  
  - Modified always not to display from /mnt/.info and following from FTP client. 
  - Modified to boot in Emergency mode (EM mode) if the log became too large at booting. 
  - Fixed the problem that the AUTO power feature stopped working in the environment where many TeraStation, LinkStation and Windows and MAC exist. 
  - Fixed the problem that the search could not be performed in the hidden share folders on the TeraStation.
  
  [Web Configuration Screen]
  - Fix the problem that the screen indicating that it was during format was not displayed and Web configuration could be performed when formatting array on the web configuration screen.
  - Modified the problem that the user/group deleted kept being displayed on the access restrictions of the shared folder.   
  
  
* Ver.1.30 [February 12, 2010]
  [Backup]
  - Now backup together feature is supported. Set another TeraStation as a backup source, and backup to the TeraStation used to set it.
  - Solved the problem that the backup would not start when the backup beginning time is 0:00 and the TeraStation is OFF at 0:00 set by Timer On/OFF feature, or it is in a standby mode set by power management with PC feature.  
  
  [RAID] 
  - Now it is possible to set RAID array check speed in RAID maintenance on Web Configuration screen.
  - Solved the problem that nothing is displayed on LCD during the resyncing of one array when RAID1 is built with array 1 and array 2 on the disk build.    
  
  [Replication] 
  - Solved the problem the replication could not be done properly when a replication destination or source file or folder name contains a space. 
  
  [System]
  - TS-XL, TS-WXL, and TS-RXL supports Wake On LAN feature. (TS-XEL does not support it.) 
  - Solved the problem that the USB drive on which the partition and the actual file system are a different format could not be detected by the TeraStation. 
  - Modified that FTP and AFP settings are also initialized by the initialized switch on the front of the TeraStation as well as other network services.  
  - Solved the problem that the IP address could not be properly changed to the static IP address when configuring Port Truncking.  
  - Solved the problem that the AutoIP address does not decide the IP address when LAN1 and LAN2 are connected to one hub. 
  - Solved the problem that a return code in a subject line of the mail notification becomes <LF> when converted to MIME. Now the mail notification feature can be used on the server which prevents from sending email from the application which uses <LF> as a return code. 
  - Solved the problem that USB drive has GPT partition formatted in NTFS was not recognized. 
  - Solved the problem that USB devices could not be removed by pressing button after aborting direct copy when connecting USB devices to the TeraStation and aborting it.
  
  [Web Configuration Screen]
  - Time zone can be set by city name on time setting on Web Configuration Screen. 
  - Multi byte characters can be used other than Japanese on Web Configuration Screen. 
  - A shared folder name can be set in up to 27 bytes long now. 
  - A shared folder description can be set in up to 75 bytes long now. 
  - Improved to display the waiting status of the previous task and next task instead of displaying tasks run repeatedly, for the task status display on the backup settings on Web Configuration screen. 
  - Modified not to be able to select a USB drive as a saving destination of direct copy on Web Configuration Screen.  
  - Solved the problem that a guest user name is not displayed in the user list on Web Screen when specific character is used for the Administrator user name. 
  - Solved the problem that the different time from the current time is set when it failed to synchronize the time with the NTP server when NTP feature is used in the time setting on Web Configuration Screen. 
  - Solved the problem that the user created is set to have "guest" privilege when that user name contains "$" or "*" in middle. 
  - Other changes are also made to descriptions and displays. 


* Ver.1.20 [Dec. 4, 2009]
  - Added network service port configuration feature. Each network service can select enable/disable for
    both Ethernat 1 and 2.
  - Allowed to use numeric characters for the beginning of shared folder name.
  - Allowed to configure up to 10000 users for Active Directory network.
    But, recommended the number of user is still 1000.
  - Solved inconstancy of mail notification sender information.
  - Fixed a bug that can not use Delegate Authority features when the administrator user name is changed from factory default setting, "admin".
  
  [NFS]
  - Allowed to configure shared NFS area to VMWare ESX/ESXi hard disk area. NFS operating mode can be
    set to kernel mode.
    
  [Replication]
  - Mail notification supports replication error event.
  

* Ver.1.10 [Oct. 1, 2009]
  [System]
  - Solved the problem that front panel LCD can not indicate used disk space properly when hard disk encryption is used.
  - Corrected unknown mail title when hard disk condition mail is sent from TeraStation.
  - Change hard disk status LED off from red solid on when hard disks becomes standby mode.
  
  - Change the schedule of status check for standby disks every first day a month.
  - Allow to change administrator user name from "admin".
  - Allow to disable to login Web setting screen by guest user, "guest".
  
  [UPS]
  - Compatible with a UPS signal divider, AP9207 manufactured by APC.
  
  [NFS]
  - Solved the problem that Windows Explorer freezes connecting by Windows Service for UNIX.
  - Solved file permission problem connecting from Unix/Linux OS.


* Ver.1.06 [Jul. 21, 2009]
  [System]
  - Solved the Hot Spare function does not work properly with specific hard drives.
  - Solved the Hot Swap function does not work properly with specific hard drives.
  - Solved the automatic power off function does not work properly when the computer is connected to LAN2 port.
  - Solved shared folder lock problem when the folder is configured as an output folder of system logging even the configuration is removed.
  - Solved unable to access encrypted volume after long time access to the volume.
  - Solved sending wrong shutdown email message instead of reboot system email message.
  - Solved indicating wrong IP address in the email notification of Port Trunking function is configured.
  - Solved "Exclude trash boxes from backup target" option does not work properly.
  - Solved turning off LCD back light problem when an external USB is connected.
  - Add System to mail notification sending condition.
  
  [UPS]
  - Solved unstable system condition when the UPS that does not support delayed cut off power feature is connected.
  
  [Replication]
  - Changed Replication behavior to synchronize again when Replication setting is modified.
  
  [Quota]
  - Solved Quota feature of encrypted volume does not work properly.
  - Solved Quota feature of the user name starts by numeric characters does not work properly.
  
  [Web Access]
  - Solved the problem unable to access restricted shared folder from iPhone/iPod touch.
  
  
* Ver.1.05 [May 29, 2009]
  [System]
  - Solved Disk/Array encryption feature problem with Port Trunking settings.
  - Solved unable to format all disk space when a disk tray is removed.

  [Print Server]
  - Remove garbage cue files in the print spool after printing from client PCs.
  
  [Replication]
  - Solved a problem when USB disk is selected for replication destination.
  - Solved a problem when different network segment TeraStation is selected for replication destination without WINS server settings.
  
  [Web Setting Screen]
  - Solved a Trash box of shared folder enabling problem when User/Group setting is changed.
  * Please confirm whether Trash box settings is enabled if you use previous version firmware. 
  - Solved disabling Port Trunking feature problem when IP address is changed.
  * Please confirm whether Port Trunking feature is disabled if you use previous version firmware. 
  (Please configure Port Trunking settings again when "NETWORK2 TRUNK" is not displayed on LCD panel.)
  - Allow to use capital characters for Group name.
  - Allow to use a Group name that starts by numeric character.
  - Add Domain user/Domain group display in User/Group menu.
  - Add the option to remove two or more replication settings at the same time.
  - Correct some cosmetic errors.


* Ver.1.04 [Apr. 27, 2009]
  [System]
  - Solved problem of time setting change manually is not stored in the system after restoring the unit.
  - Solved unable to login web setting page after shutting down by automatic power off feature, UPS or sleep timer.
  [Web Setting Screen]
  - Solved problem removing access restriction information except local users during shared folder setup.
  - Solved problem access restriction information except local users is not copied when a new folder is created referring to existing folder.

* Ver.1.02 [Apr. 16, 2009]
  [Web Setting Screen]
  - Revised notation of the Korean.

* Ver.1.01 [Apr. xx, 2009]
  [System]
  - Solve DFS function does not work.
  - Solved mail notification does not work when used disk space exceeds quota warning threshold level.
  - Solved mail notification does not work when boot up or shutdown.
  - Solved communication problem between LAN2 port of each TS-XL/R5 series.
  - Solved status LED does not flash after detecting hard disk by system during replacement of hard disk.
  - Solved Access Restriction setting does not work under NT4.0 domain environment.
  - Solved Disk Check does not work for encrypted disk.
  - Change timer ON/OFF setting allows to configure up to 27:45.
  
  [Backup]
  - Solved configuration problem backup destination from LAN port 2.
  
  [Replication]
  - Increased number of available tasks from 2 to 64.
  - Solved the files and folders written by FTP/FTPS protocol are not transferred to destination.
  
  [UPS]
  - Solved UPS control function problem connecting to serial port.
  
  [Web Setting Screen]
  - Improved performance of adding many users and groups to access restriction setting
  in Shared Folder setup.



* Ver.1.00 [Feb. 23, 2009]
- New release.