TS-X Series Firmware Updater for Mac Version 1.73

 Name		  TS-X Series Firmware Updater
 Version		  1.73
 File		  tsx_series-173_fwmac.dmg.zip
 Size		  366,580,812 bytes
 Date		  March 26, 2020
 Platform		  Intel Mac
 OS		  macOS 10.4 or later
 Models		  TS-XL/R5, TS-WXL/R1, TS-WXL/1D, TS-RXL/R5, TS-XEL/R5, TS-XHL/R6
 Copyright		  Buffalo Inc.
 Distribution	  .ZIP archive
 Condition	  Re-distribution is not allowed.
 Manuals		  Quick setup guide, user manual
This product uses GPL/LGPL applicable software and you are welcome to keep, modify, and redistribute the source code. Please ask our technical support representatives about modified GPL and applicable modules, and how to deliver them. You may be charged for the delivery cost.

[Software Description]
This software will update the TS-X series TeraStations’ firmware to version 1.73. If your unit’s firmware is already version 1.73 or later, you don’t need this update.

[How to Verify the Firmware Version]
Select your TeraStation from NAS Navigator2. The firmware version is displayed on the bottom right corner of the window.

[Updating Firmware]
• Please consult technical support or your local customer service representative if the firmware update causes unexpected problems.
• Do not turn off the TeraStation until the firmware update is completed and the “Finished” message is displayed.
• Updating from firmware version 1.10 or earlier may wipe the time zone settings. In such a case, reconfigure the time zone so there wll not leave a gap of time.
• After updating the firmware to the latest version, NAS Navigator2 may display an “Unknown error occurred” message. In such a case, make sure NAS Navigator2 has been updated to the latest version. The update software is available from the d.buffalo website.
• Make sure the TeraStation’s Ethernet frame size is set to a value smaller than that of the hub or router. Larger frame sizes may not allow data to be transferred to the TeraStation properly.

[How to Update the Firmware]
1. Extract the downloaded installer file.
2. Execute “update”, then refer to the on-screen instructions.

[Release Notes]
Version 1.73 [2020-03-26]
Added and Modified Features
[Disks]
• Modified so that when a drive with S.M.A.R.T. disabled is inserted, S.M.A.R.T. will be automatically enabled.

Bug Fixes
[System]
• Modified to patch vulnerabilities (CVE-2015-8325, CVE-2016-1908, CVE-2016-6210, CVE-2016-6515, CVE-2016-10009, CVE-2016-10010, CVE-2016-10011, and CVE-2016-10012).

Version 1.72 [2018-01-22]
Bug Fixes
[Network Services]
• Modified to patch a Samba programming vulnerability (CVE-2017-15275).

Version 1.71 [2017-07-03]
Added and Modified Features
[Replication]
• Added the field to enter a backup device access key. This access key is the same as the one used for backup jobs.

Bug Fixes
[Network Services]
• Modified to patch a Samba programming vulnerability (CVE-2017-7494).

Version 1.66 [2015-04-06]
Bug Fixes
[Network]
• Modified to patch OpenSSL programming vulnerabilities (CVE-2014-3567 and CVE-2014-3568) that are also known as the POODLE (SSL3.0) vulnerability.

[Network Services]
• Modified to patch Samba programming vulnerabilities (CVE-2014-0178, CVE-2014-0244, CVE-2014-3493, and CVE-2015-0240).
• Fixed a bug where the initial settings of WebAccess failed.

Version 1.65 [2014-11-05]
Added and Modified Features
[Replication]
• Modified so that multiple jobs can be added or deleted by adding the settings window.

Bug Fixes
[Replication]
• Fixed a bug where a replication error occurred when too many files were copied to the replication source folder.
• Fixed a bug where the first file resync failed if replication finishes after 8 hours of idle time without any operations or activity from the replication source.
• Fixed a bug where replication didn’t work properly if multiple replication jobs were added.

[Backup]
• Fixed a bug where a shared folder in the another TeraStation’s LVM volume could not be detected when creating a backup job.

[System]
• Fixed a bug where a drive error was mistakenly detected if the TeraStation was working for a long time.
• Fixed a bug where the LAN port LED extinguished for a few seconds, and the system became unstable or file transfers became slow if the Ethernet cable was disconnected from the TeraStation when replicating too many files.
• Fixed a bug where the TeraStation could not be shut down using the power button when replicating too many files.
• Fixed a bug where Settings was not accessible when replicating too many files.

Version 1.64 [2014-10-14]
Bug Fixes
[System]
• Modified to patch Bash programming vulnerabilities (CVE-2014-6271 and CVE-2014-7169).
• Fixed a bug where auto power mode sets the TeraStation into sleep mode even while the computer with NAS Navigator2 installed is powered on.

Version 1.63 [2014-02-04]
Bug Fixes
[Replication]
• Fixed a bug where a replication error occurred even though there were no replication jobs created.
• Fixed a bug where an error occurred when resyncing while copying files into the replication source folder.
• Fixed a bug where resync failed if files with “%n” in their filename were included.
• Fixed a bug where replication stopped when replication resynced.

[Backup]
• Fixed a bug where some files were not backed up when multiple files were backed up at once.

[Network]
• Fixed a bug where the file attribute of php files changed to read-only when they were copied.

Version 1.62 [2013-11-19]
Added and Modified Features
[System]
• Reduced the number of log events written to the system log file.

Bug Fixes
[Replication]
• Fixed a bug where if replication and sleep timer or auto power mode were enabled concurrently, the TeraStation boots into emergency mode.

Version 1.61 [2013-09-09]
Added and Modified Features
[Replication]
• Updated replication.
• Replication source TeraStation can now have multiple file operations.

[Virus Scanning]
• Improved the performance of opening Microsoft Office files while antivirus is enabled.

Bug Fixes
[Replication]
• Fixed a bug where if a shared folder’s trashbox is enabled, deleting multiple files caused a synchronization failure.

[WebAccess]
• Fixed a bug where alphanumeric characters could not be used to log in from iOS 6 devices.

[Settings]
• Fixed a bug where the first letter of a folder could not be an alphanumeric character if DFS was configured.
• Fixed a bug where a shared folder that contained a similar folder name couldn’t be selected as a target folder.

[System]
• Fixed a bug where firmware updating failed via BN-ADT.
• Fixed a bug where an error was mistakenly detected when the UPS switched to battery power.
• Fixed a bug where shared folders weren’t accessible after formatting failed.

Version 1.60 [2013-05-23]
Note: This firmware update is only for TS-XEL/R5 series TeraStations.
Bug Fixes
[System]
• Fixed a bug where the TeraStation didn’t boot properly with certain hard drives.

Version 1.59 [2013-03-13]
Bug Fixes
[Settings]
• Improved security of Settings page.
• Fixed a bug where Settings didn’t immediately show when a USB drive was dismounted.

[System]
• Fixed a bug where logs could not be accessed from the links in shared folders.
• Fixed a bug where files in the “info” folder could not be accessed from a TS-XHL/R6 running firmware version 1.58.

Version 1.58 [2013-01-24]
Added and Modified Features
[Network Services]
• Improved connectivity with Active Directory (Windows Server 2008 and Windows Server 2008 R2) when joining the TeraStation to the domain network and accessing from a computer. The following issues will be fixed by this update: (1) A computer cannot access shared folders by IP address even though the hostname is valid, (2) After joining Active Directory, TS-X can’t download domain users, (3) Backup fails if TS-X is configured as backup target for Windows Server backup.

[Network]
• Added guest permissions to files written with NFS.
• You can preserve file permissions when using NFS. To enable this function, go to ‘Network’ > ‘NFS’ > ‘NFS Service’ and set “Guest Permission” to “Ignored”. If “Guest Permission” is set to “Forced”, User ID and Group ID should be set to 99 when using NFS.

Bug Fixes
[Virus Scanning]
• Fixed a bug where the TeraStation could not be shut down while manual scanning.
• Fixed a bug where Trend Micro NAS Security is deactivated when initializing from Settings.

[Settings]
• Fixed a bug where Settings could not be accessed after a shared folder was deleted.

[WebAccess]
• Fixed a bug where server certification did not match the imported certification on Settings.

[Backup]
• Fixed a bug where Windows backup failed.

[Network]
• Fixed a bug where FTP connections did not work properly if a filename included brackets ("[" or "]") and FileZilla was being used as the FTP software.

[Web Server]
• Modified to patch a web server lighttpd vulnerability (JVNDB-2011-003541).

[Replication]
• Fixed a bug where replication stopped when files or subfolders in the replication source were deleted while the recycle bin was enabled.

Version 1.57 [2012-07-18]
Bug Fixes
[System]
• Fixed a bug where if the TeraStation runs for 60 days continuously, the system becomes unstable and freezes.
• Fixed a bug where email notification failed when the TeraStation used a specific mail server system.

[Replication]
• Fixed a bug where the  E26 error appeared when multiple file operations such as rename or delete were used during replication file copying.

[Network]
• Modified to patch a Samba programming vulnerability (CVE-2012-1182).
• Fixed MySQL security issues (http://dev.mysql.com/doc/refman/5.0/en/news-5-0-96.html).
• Modified to patch PHP vulnerabilities (CVE-2011-1464, CVE-2011-1153, CVE-2011-1092, CVE-2011-0708, and CVE-2011-0421).
• Modified to patch phpMyAdmin vulnerabilities (CVE-2011-2505 and CVE-2011-2506).

[Users/Groups]
• Fixed a bug where TeraStation did not reboot properly if it joined an Active Directory environment with over 9000 users and 5000 groups.

Version 1.56 [2012-07-03]
Bug Fixes
[System]
• Fixed a bug where the E30 error occurred when the TeraStation enters sleep mode.

Version 1.55 [2011-11-10]
Added and Modified Features
[Backup]
• The I54 message now appears when backup fails.

[System]
• Now supports OS X 10.7 Lion. The new compatibility allows shared folders with access restrictions enabled to be accessible via AFP, and Time Machine can now work on a computer running OS X 10.7 Lion.
• Now supports Windows Server backup. The TeraStation’s shared folder can be now selected as a backup destination for Windows Server backup.
• Modified so that the I52 message can be disabled. If update notification is disabled, notifications will not be sent to NAS Navigator2, the LCD panel, or the Settings login screen when a new firmware version is available.
• Modified to display the message on the LCD panel while entering standby mode.
• Now allows USB drives up to 3 TB to be detected and formatted.

[Virus Scanning]
• Modified so that the “TMNAS” folder (hidden with access restrictions) will be created automatically if an array or drive was formatted when virus scanning is enabled.

Bug Fixes
[Backup]
• Fixed a bug where the TeraStation’s shared folder occasionally wouldn’t open while third-party backup software was backing up to the TeraStation.

[Replication]
• Fixed a bug where if replication was enabled, the firmware could not be updated or the incorrect information was displayed.
• Fixed a bug where if a specific FTP client was used to upload files from the destination source, extra files were not reflected on the replication destination.
• Fixed a bug where files with consecutive spaces and “#” in their filenames were not properly synchronized to the replication destination.
• Fixed a bug where copying files failed and a warning appeared if too many files were copied from the replication source folder via SMB.

[WebAccess]
• Fixed a bug where WebAccess features using UPnP could not be configured on some routers.

[Network]
• Fixed a bug where the TeraStation did not reboot when certain data was sent to the correct wake-on-LAN port.
• Fixed a bug where the IP address was automatically set to 192.168.11.150 if jumbo frames were configured after configuring port trunking.
• Fixed a bug where unplugging LAN port 1 or LAN port 2 causes complete disconnection when LAN port 1 and LAN port 2 were connected to the same network.

[Disks]
• Fixed a bug where if the TeraStation shuts down or reboots while using TurboCopy, the array degrades.
• Fixed a bug where the E30 error mistakenly appeared while an array is rebuilding.
• Fixed a bug where the displayed drive structure on the LCD panel did not refresh after deleting an array.
• Fixed a bug where a USB drive connected to the TeraStation was not detected and services such as Samba could not be used to detect it even after rebooting the TeraStation.

[System]
• Modified to patch a Samba programming vulnerability (CVE-2011-0719).
• Fixed a bug where the “recovery of the disk constitution information” email was sent when booting the TeraStation if a hot spare was configured.
• Fixed a bug where the sent times for email notifications were incorrect.
• Fixed a bug where connecting to the TeraStation via SMB failed if a multibyte character was used in DFS.

Version 1.54 [2011-07-07]
Bug Fixes
[Disks]
• Fixed a bug where the E30 error mistakenly appeared for a drive configured as a hot spare when rebooting the TeraStation. This issue only occurred with firmware version 1.53.

Version 1.53 [2011-06-27]
Added and Modified Features
[WebAccess]
• Updated to version 3.4.
• Improved the interface when accessing from mobile devices.
• Changed and extended the supported devices and OS. Refer to the following URL for details: http://buffalonas.com/manual/en/iphone00.html

[Settings]
• Now supports Arabic, Finnish, and Turkish.
• Modified so that class B addresses can be entered for the IP address settings.

Bug Fixes
[Backup]
• Fixed a bug where the backup destination could not be found from Settings when there are multiple shared folders set as backup destinations.
• Fixed a bug where backup service for LAN port 2 was also disabled when backup service for LAN port 1 was disabled in network services settings.

[Replication]
• Fixed a bug where mail notification was occasionally not sent if replication failed.
• Fixed a bug where the E26 error appeared for the wrong device when a synchronization error occurred on the replication destination.

[WebAccess]
• Fixed a bug where WebAccess features using UPnP could not be configured on some routers.
• Fixed a bug where WebAccess configuration of the USB drive was set to the default values after updating firmware from version 1.10 or earlier.

[UPS Settings]
• Fixed a bug where the E10 error occurred when configuring a UPS in Settings.

[System]
• Fixed a bug where a malfunctioning drive could not be identified and the unit entered into emergency mode.
• Fixed a bug where the I17 message does not disappear after a RAID 10 array is built and drives are formatted.

Version 1.52 [2011-05-18]
Bug Fixes
[System]
• Fixed a bug where updating firmware to version 1.51 for TS-XL and TS-RXL series TeraStations occasionally failed and the E14 error appeared.

Version 1.51 [2011-04-21]
Added and Modified Features
[Firmware Installation]
• Now supports online updating. If the TeraStation is connected to the Internet, it can check for the newest firmware version and update it from Settings.

[Web Service Support]
• Now supports Eye-Fi. Pictures on an Eye-Fi memory card can now be automatically transferred to the TeraStation over the Internet.

[Virus Scanning]
• Now supports French, German, and Chinese.

[Disks]
• Modified to only display the E30 error when a drive fails. The E13, E15 and E23 errors were usually displayed.

[Settings]
• Now displays the “Exx” errors and the “Ixx” messages in Settings if they occur on the TeraStation.

[Email Notification]
• Modified the text in the notification email for a read error from a drive in JBOD or a USB drive.

[System]
• Modified so that if the TeraStation gets corrupted due to a sudden power outage, the drive structure file will be repaired automatically after rebooting the TeraStation.

Bug Fixes
[Virus Scanning]
• Fixed a bug where activation failed even though the correct serial number was entered.
• Fixed a bug where the “splx_watchd_exec.sh： File delete or move event detected!” log was recorded to the system log every 5 minutes.
• Fixed a bug where “localhost.localdomain” was recorded as a hostname in the system log.

[Network Services]
• Modified to patch FTP vulnerabilities.
• Fixed a bug where after a text file was append-sent with FTP, the files put-sent after that were also appended.

[Replication]
• Fixed a bug where after replication is configured, it aborted on the first of every month at 2:15 a.m.

[Settings]
• Fixed a bug where everything is displayed in English even though the language is set to Italian.
• Fixed a bug where changing the password failed if multiple users simultaneously log in to Settings and change their user passwords.

[Users/Groups]
• Fixed a bug where a user with the character “$” in the username could not be added as a group member.

[WebAccess]
• Fixed a bug where files larger than 500 KB could not be downloaded from WebAccess when using Internet Explorer.

[BitTorrent]
• Fixed a bug where BitTorrent Download Manager settings reverted to their default values when the TeraStation rebooted.

[Disks]
• Fixed a bug where the array became degraded or corrupted in the early morning of the 1st of the month if a hot spare was configured on the TS-XEL/R5 series TeraStations.
• Fixed a bug where the I11 message did not disappear even after to a new drive replacement drive was inserted.
• Fixed a bug where the I12 message appeared even though the array has not yet been built.
• Fixed a bug where the I11 message appeared but then disappeared after the TeraStation was restarted.

[System]
• Fixed a bug where data was lost after the next bootup if a USB drive was connected and the function button was pressed as the TeraStation boots into emergency mode.
• Fixed a bug where the TeraStation did not boot if a shared folder contains 1.5 million or more files and folders.
• Fixed a bug where TeraStation could not boot up when the system was corrupted.

[SleepTimer]
• Fixed a bug where the TeraStation did not boot if the time zone was set to anything other than “(UTC+09:00)”.
• Fixed a bug where SFTP connection sometimes did not work after the TeraStation booted by the sleep timer.

[Email Notification]
• Fixed a bug where a write error email notification was sent when the drive was dismounted.

[Firmware Installation]
• Fixed a bug where the message “Could not confirm that the firmware of the TeraStation was overwritten.” was displayed when updating the firmware.

Version 1.50 [2010-11-24]
Added and Modified Features
[Virus Scanning]
• Modified to display a warning if antivirus could not be activated due to incorrect network settings.

Bug Fixes
[Backup]
• Fixed a bug where backup jobs sometimes failed because Symantec Backup Exec System Recovery froze the system.

[Disks]
• Fixed a bug where the E23 error was displayed on the LCD panel for a few seconds for the incorrect drive if the RAID array entered degraded mode.
• Fixed a bug where the I12 message appeared after a hot spare was added to a RAID array even though the TeraStation did not boot in degraded mode and the rebuild was successful.
• Fixed a bug where the E22 error appeared if a hot spare was successfully mounted to the array.

[Virus Scanning]
• Fixed a bug where access restrictions for a quarantined folder were set to read-only if a drive was formatted after changing the drive configuration.
• Fixed a bug where a quarantined folder was created on an array that did not exist if performing a complete drive format with antivirus enabled.

[BitTorrent]
• Fixed a bug where a disconnected USB drive was no longer set as the BitTorrent download folder after a reboot.
• Fix a bug where that the BitTorrent settings page would not open after the TeraStation’s language setting was changed while BitTorrent was enabled.

[Network Services]
• Modified to patch a Samba vulnerability (CVE-2010-3069).
• Fixed a bug where a user with a username that contains capitalized letters could not be automatically registered when using “Delegate Authority to External SMB Server”.
• Fixed a bug where AFP file copying is sometimes slow during replication.

[TeraSearch]
• Fixed a bug where hidden shared folders could not be detected using TeraSearch.

[Replication]
• Fixed a bug where the TeraStation failed to reboot when more than 40 replication jobs were configured and deleted.
• Fixed a bug where the E26 error appeared while configuring a replication job, copying hundreds of files to the replication source, delete the first replication job immediately, and reconfiguring the first replication job.

[Users/Groups]
• Fixed a bug where group names could not be 13 bytes or longer. Now, a group name can contain up to 20 bytes.

Version 1.41 [2010-09-09]
Bug Fixes
[Disks]
• Fixed a bug where a file system (XFS) error sometimes occurred after a new drive was inserted and the RAID array was rebuilt because the drive had formally been part of a degraded RAID 5 array.

[Workgroup/Domain]
• Fixed a bug where the TeraStation could not join an NT domain if the unit was running firmware version 1.40.

[Network Services]
• Fixed a bug where AFP file copying is sometimes slow during replication.
• Fixed a bug where FTP connections were unavailable if FTP was enabled for many users.

[Network]
• Fixed a bug where establishing the link took longer if a static IP address was configured and the TeraStation was connected to a gigabit hub.

Version 1.40 [2010-08-09]
Added and Modified Features
[Virus Scanning]
• Now includes “Trend Micro NAS Security” virus scanning software. Extended virus scanning update licenses are available separately (OP-TSVC-5Y, OP-TSVC-3Y, and OP-TSVC-1Y).

[WebAccess]
• Updated to version 3.4.
• Now supports access from iOS 4 devices.
• Now supports HTC Magic, HTC Desire, and Xperia X10 devices.
• Modified so that multiple items can now be selected using the Ctrl key other than in the list view.
• Modified so that files with the same name can be renamed if the filename is duplicated.
• Improved the process speed if multiple clients access the TeraStation.

For a more detailed description of functions, see http://buffalonas.com/manual/en/.

[Workgroup/Domain]
• Now supports additional symbols that can be used for the administrator password when joining a domain. Available symbols - _ ) ( > < } { ] [ ; ~ / , ' ? | + =

Bug Fixes
[TeraSearch]
• Fixed a bug where sorting by ascending or descending order did not work when searching with TeraSearch.

[Replication]
• Fixed a bug where replication failed when the IP address of the replication destination was changed.

[Web Server]
• Fixed a bug where changes to php.ini were not reflected.

[Network Services]
• Modified to patch a Samba vulnerability (CVE-2010-2063).
• Fixed a bug where the TeraStation could not boot if SFTP was enabled.

[Backup]
• Fixed a bug where a backup job failed if another Buffalo NAS device with its remote backup password configured was set as the backup source.

[System]
• Fixed a bug where the “I’m here” feature did not work from NAS Navigator2.

[Disks]
• Fixed a bug where a RAID array entered into degraded mode if a drive was not recognized during boot.

Version 1.32 [2010-06-03]
Added and Modified Features
[UPS Settings]
• Added feature where the UPS can be shut down along with a TeraStation.
• Now supports additional UPS models.

[Network]
• SNMP is now supported. TeraStation can be browsed from any network management software that supports the SNMP protocol.
• Now supports web server.
• Now supports MySQL server.

[WebAccess]
• Updated to new version.

[BitTorrent]
• Updated to new version.

[Network Services]
• Files under “/mnt/.info” are now always hidden using an FTP client.

[TeraSearch]
• Now adds more file formats searched via TeraSearch.

[Disks]
• Modified so that remaining available space is now displayed correctly when connecting a Buffalo HD-AVL.
• Modified so that an error now appears if a drive’s self diagnostic information status detects “FAIL”.

[System]
• Now boots into emergency mode if the log is too large.

Bug Fixes
[Backup]
• Fixed a bug where a backup job was ran and the TeraStation booted into standby mode if the schedule had not been set for either.
• Fixed a bug where filenames that were 170 KB or larger were not detected on the list of backup sources.

[System]
• Fixed a bug where a folder could not be deleted and shared folders could not be accessed temporarily.
• Fixed a bug where TeraStation rebooted repeatedly before the boot process completed.
• Fixed a bug where auto power mode did not work correctly in environments with many TeraStations, LinkStations, and other computers.

[TeraSearch]
• Fixed a bug where hidden shared folders could not be searched.

[Settings]
• Fixed a bug where other settings could be changed while the RAID array was formatted.
• Fixed a bug where a deleted user or group remained listed in the access restrictions for a shared folder.

Version 1.30 [2010-02-12]
Added and Modified Features
[Backup]
• Now configures the TeraStation as the target of a backup job which was previously the backup source.
• Modified so that the status of the previous job and the next job are now displayed in the job status in Settings.

[Direct Copy]
• Modified so that a USB drive can no longer be configured as a destination for Direct Copy.

[RAID]
• Modified so that the RAID scanning speed can now be changed.

[System]
• Now supports Wake-on-LAN on the TS-XL series, TS-WXL series, and TS-RXL series TeraStations.
• Modified so that the FTP and AFP settings are now initialized using the init button.

[Date and Time]
• Now available to select using the city name for the time zones.

[Settings]
• Now supports multibyte characters other than Japanese.
• Folder names can now be up to 27 bytes.
• Folder descriptions can now be up to 27 bytes.

Bug Fixes
[Backup]
• Fixed a bug where backup did not start if the TeraStation was powered off by sleep timer or the TeraStation entered into standby mode by auto power mode.

[RAID]
• Fixed a bug where nothing displayed on the LCD panel which the resyncing of an array when RAID 1 was built on array 1 and array 2.

[Replication]
• Fixed a bug where replication failed if there were files or folders with names that contained a space on the replication source or destination.

[System]
• Fixed a bug where the USB drive could not be detected if the partition and the actual file system were of different formats.
• Fixed a bug where a static IP address could not be set if port trunking was configured.
• Fixed a bug where an IP address was assigned automatically if LAN port 1 and LAN port 2 were connected to the same hub.
• Fixed a bug where the carriage return code in a subject line of an email notification became <LF> when converted to MIME.
• Fixed a bug where USB drives with GPT partitions formatted by NTFS were not recognized.
• Fixed a bug where USB devices could not be dismounted by pressing the function button after Direct Copy was aborted.

[Date and Time]
• Fixed a bug where the incorrect time was set if the TeraStation failed to synchronize with the NTP server while NTP was enabled.

[Settings]
• Fixed a bug where a guest username was not displayed in the user list if specific characters were used in the administrator username.
• Fixed a bug where new users were given “guest” privileges by default if their username contained a “$” or “*” as a middle character.
• Fixed other minor UI errors.

Version 1.20 [2009-12-04]
Added and Modified Features
[Network Services]
• Modified so that a network service port can now be configured. Each network service can be enabled or disabled for the Ethernet 1 or 2 ports separately.

[System]
• Modified so that shared folder names can now begin with numeric characters.

[Workgroup/Domain]
• Modified to expand the number of acquirable domain users and groups from a maximum of 1,000 to 10,000.

[NFS]
• Modified so that a shared NFS area can now be configured to VMware ESX/ESXi hard disk area. NFS operating mode can be set to kernel mode.

[Replication]
• Modified so that email notifications now include replication error events.

Bug Fixes
[Email Notification]
• Fixed a bug where email sender information was inconsistent.

Version 1.10 [2009-10-01]
Added and Modified Features
[System]
• Modified so that the status LEDs will no longer glow when drives enter standby (previously it would stay on).
• Modified so that operations for standby drives will be checked on the first day of every month.
• Modified so that the administrator username can now be changed from “admin”.
• Modified so that guest users no longer be accessed to Settings.

[NFS]
• Fixed a bug where a file permission error occurred if connecting to Unix or Linux OS.

Bug Fixes
[System]
• Fixed a bug where the used space on the LCD panel was not displayed properly if a drive was encrypted.
• Fixed a bug where “Unknown Md Area” or “Unknown Disk” were displayed in notification emails.

[UPS Settings]
• Now supports AP9207 UPS signal divider manufactured by APC.

[NFS]
• Fixed a bug where Windows Explorer froze when connecting to a Windows service for UNIX.

Version 1.06 [2009-07-21]
Added and Modified Features
[Email Notification]
• Modified so that system events will now be available for email notifications.

[Replication]
• Modified replication to automatically re-synchronize every time its settings are changed.

Bug Fixes
[Disks]
• Improved hot-swapping compatibility with specific drives.
• Fixed a bug where a replaced new drive was not detected if a specific drive was used as a replacement drive.
• Fixed a bug where encrypted volumes could not be accessed after prolonged use.

[System]
• Fixed a bug where automatic power-off did not work properly if the computer was connected to the LAN port 2.
• Fixed a bug where the shared folder became locked if the folder was configured as an output folder for system log and then the designation was removed.
• Fixed a bug where “Exclude trash boxes from backup target” option does not work properly.
• Fixed a bug where LCD backlight turned off if an external USB drive was connected.

[Email Notification]
• Fixed a bug where an email normally sent when shutdown started was sent after the TeraStation restarts.
• Fixed a bug where the wrong IP address was displayed in the email if email notification was configured while port trunking was enabled.

[UPS Settings]
• Fixed a bug where the system became unstable after connecting a UPS that did not support delayed cut-off power.

[Quota]
• Fixed a bug where quotas did not work properly on encrypted volumes.
• Fixed a bug where quotas did not work properly when the username started with numeric characters.

[WebAccess]
• Fixed a bug where access-restricted shared folders could not be accessed from iOS devices.

Version 1.05 [2009-05-29]
Added and Modified Features
[Settings]
• Modified so that domain users and groups can now be displayed on the users and groups list.
• Modified so that replication source and destination pairs can now be deleted at once.

Bug Fixes
[System]
• Fixed a bug where encrypted drives and arrays became unavailable after restarting the TeraStation if port trunking was configured.
• Fixed a bug where drives could not be formatted if some drives were not inserted.

[PrintServer]
• Fixed a bug where cue files remained in the print spool after printing from client PCs.

[Replication]
• Fixed a bug where replication did not work if a USB drive was selected as the replication destination.
• Fixed a bug where replication did not work if a TeraStation unit on a different network segment was selected as the replication destination without changing WINS server settings.

[Settings]
• Fixed a bug where a recycle bin was enabled after user or group settings were changed. Please confirm if the recycle bin has been disabled after updating the firmware.
• Fixed a bug where port trunking was disabled after the IP address was changed. Please confirm if port trunking has been disabled after updating the firmware.
• Fixed a bug where capitalized letters could not be used in the group names.
• Fixed a bug where the group names could not begin with numeric characters.
• Fixed other minor UI errors.

Version 1.04 [2009-04-27]
Bug Fixes
[System]
• Fixed a bug where manually-configured time settings were not saved after the TeraStation was restarted.
• Fixed a bug where users could not log in to Settings if the TeraStation was powered off by either auto power mode, UPS sync, or sleep timer.

[Settings]
• Fixed a bug where only access restrictions can be removed by all except for local users when editing a shared folder.
• Fixed a bug where the only shared folder’s settings applied were access restrictions settings for local users.

Version 1.02 [2009-04-16]
[Settings]
• Fixed some Korean text.

Version 1.01 [2009-04-02]
Added and Modified Features
[SleepTimer]
• Modified to allow up to 27:45 for sleep timer.

[Settings]
• Improved performance of adding access restrictions for many users and groups in shared folder setup.

Bug Fixes
[System]
• Fixed a bug where DFS did not work.
• Fixed a bug where TS-XL/R5 series TeraStations could not properly communicate via LAN port 2.
• Fixed a bug where the status LED did not blink after a drive was detected after replacing the drive.
• Fixed a bug where access restrictions could not be configured with an NT 4.0 domain environment.
• Fixed a bug where drive check did not work for encrypted drives.

[Email Notification]
• Fixed a bug where an email was not sent when used drive space exceeded the quota warning threshold level.
• Fixed a bug where an email was not sent when the TeraStation booted up or shut down.

[Backup]
• Fixed a bug where the TeraStation was not detected as a backup destination if the unit was connected using LAN port 2.

[Replication]
• Increased number of available jobs from 2 to 64.
• Fixed a bug where files and folders written via FTP or FTPS protocols not transferred to their destinations.

[UPS Settings]
• Fixed a bug where UPS settings did not work if a UPS device was connected to the serial port.

Version 1.00 [2009-02-23]
• Initial release.