Summary

Minimum Requirements

• Compatible operating systems: Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista, OS X 10.11-10.5
• Compatible browsers: Internet Explorer 10 or later, Firefox 2.x or later, Safari 2.x or later
• A TCP/IP connection
• Wired or wireless network card

How to Update

1. Boot your PC.
   
   
2. Confirm that the LAN adapter's and the AirStation's IP addresses are on the same network subnet. Refer to the AirStation's user manual for instructions on changing its IP address.
   
   
3. Select Run from the Start Menu.
   Enter "http://192.168.11.1/" (the AirStation's LAN-side IP address) into the field and click OK.
   
   
4. Settings opens. Enter password and click Submit.
   
   
   
   
   
5. The setup screen is displayed. Click System Settings from the side menu.
   
   
   
   
   
6. Click Firmware.
   
   
   
   
   
7. Click Upload & Check or Browse and select the firmware file. The filename should be "wxr1900dhpd-XXX.bin" (where "XXX" is the version number).
   Click Upgrade Firmware or Submit.
   
   
   
   
   
8. During the firmware update, the power LED will blink for about 5 minutes. When the update is finished, the LED will turn off. Do not turn off the AirStation until the firmware update is finished. If the unit is unplugged while the power LED is still blinking, the AirStation may be damaged.
   
   
   
   
   
9. Proceed to the next step.
   
   

Firmware Version Confirmation

1. To open Settings, refer to steps 1 to 4 of "How to Update" section above.
   
   
2. Confirm that the firmware version is "r1.5.5".
   
   
   
   
   

Version History

r1.5.5

Bug Fixes

1. Fixed the WPA/WPA2's security vulnerabilities.
2. Fixed the dnsmasq's vulnerabilities（VU#973527）.
3. Fixed the Samba's vulnerabilities（CVE-2017-15275）.
4. Fixed the issue where you could not access the Internet using IPv6 connectivity.
5. Fixed the issue where the AirStation could not automatically access the wireless bridge after rebooting when the operation mode is set to "Wifi".

r1.5.0

Bug Fixes

1. Fixed the Samba vulnerability CVE-2017-7494.
2. Fixed an issue where the AirStation would randomly reboot during use.

r1.4.5

Added Features

1. Added Wake-on-LAN function.
2. Added DHCP Server's settings for:
   - Client lease time
   - Client gateway configuration
   - Additional DNS servers
3. Added the key renew interval setting for WPA authentication types.
4. Added the advanced system logging function.
5. Added the function to install packages from the official repository.
6. Added an improved switch configuration: WAN-port can now be added to LAN.
7. Added the default NTP server address.
8. Added the reboot button.

Bug Fixes

1. Fixed an issue where the timeout setting for a web session did not work correctly.
2. Fixed an issue where a custom MTU value for WAN-PPPoE could not be set correctly.
3. Fixed the Samba badlock vulnerability.

r1.3.4

Added Features

1. Applied the new UI framework.
2. Added multi SSID function.
3. Added guest SSID function.
4. Added the menu for the client status (wireless, active, DHCP).
5. Added "Client IP Range" and "Max. Client Leases" options to DHCP server settings.
6. Added UPnP function.
7. Added "Username" and "Password" forms to OpenVPN settings.
8. Added the menu for package installation.
9. IPv6 is now supported with a DHCPv6 connection.
   IPv6 PPPoE connections are not supported.
10. USB drive connections are now supported. Added Windows file sharing function.
    The supported format types are FAT, VFAT, EXT4.

r1.1.1

Bug Fixes

1. Improved stability of wireless communication in 5GHz.

r1.1.0

Bug Fixes

1. Fixed the issue where the wireless connection became disabled when the LAN-side IP address was changed.
2. Fixed the issue where PPTP could not connect again from LAN-side PC to the outside.
3. Fixed the issue where FTP connection could not be established in active mode from the LAN-side PC.
4. Changed the behavior of the Internet LED to off from blinking when the Internet is not connected.
5. Changed the behavior of the AOSS button to start WPS after being pressed for 3 seconds.
6. Fixed the issue where some characters could not be used for the SSID.
7. Added "Disabled" option to the operation mode of the Internet.

Restrictions

1. You cannot log in to Settings using Internet Explorer 9 with this firmware version. To log in, use Internet Explorer 10, Firefox, or Chrome.
2. If "Best Channel" is selected for a channel, the bandwidth will be set to "40 MHz" automatically even if "802.11ac 80 MHz" is selected as the bandwidth. Select a channel manually to keep using 80 MHz bandwidth.

r1.0.2

     Initial release