Summary

Software information

Minimum Requirements

• Compatible OS: Windows 7/Vista/XP/2000/Me/98SE; Mac OS X 10.4/10.5
• Compatible browser: Internet Explorer 7.x or later, Firefox 2.x or later, Safari 2.x or later
• A TCP/IP connection is required to install this firmware update.
• Wired or wireless network card.

How to update the firmware

1. Start up Windows.
   
   
2. Please confirm that both the LAN adapter and the AirStation's IP addresses are on the same network subnet. Refer to AirStation's user manual for instructions on changing IP address settings.
   
   
3. Select [Run] from the Start Menu.
   Enter "http://192.168.11.1/" (the AirStation's LAN side IP address) in the field and click "OK".
   
   
4. Select how you want to change the firmware:
   
   Updating Professional Firmware to the Latest Version
   Change from User Friendly Firmware -> Professional Firmware
   
   

1. Navigate to the AirStation's web admin interface.
   If you haven't created a account yet, enter a username and password. Click "Change Password".
   
   
2. This screen is displayed. Click "Administration" from the upper menu.
   When the login prompt appears, enter your new username and password.
   
   
3. Click "Firmware Upgrade".
   
4. Click "Browse" to the right of "Please select a file to upgrade" and navigate to the extracted firmware file. The file should be in the form "wzrhpg300nh2-pro-***.enc" where *** is the version number. Click "Upgrade".
   
   
   
   
5. During the firmware update, the diag LED will flash for about 5 minutes. When the update is complete, the LED will turn off. Do not turn off the AirStation until the firmware update is complete. If the unit is unplugged while the diag LED is still flashing, the AirStation may be damaged.
   
   
   
6. Proceed to the next step, "Firmware Version Confirmation".
   
   

1. When the login prompt appears, enter "root" for the username and leave the password field blank. Note: if you configured a password, enter the password that you configured.
   
   
2. Click "Update AirStation Firmware" at the top of the screen.
   
   
3. Click "Browse" to the right of "Firmware File Name" and browse to the extracted firmware file with the filename "wzrhpg300nh2-pro-***.enc" (where *** is the version number). Click "Update Firmware".
   
   
   
   
4. During the firmware update, the diag LED will flash for about 5 minutes. When the update is complete, the LED will turn off. Do not turn off the AirStation until the firmware update is complete. If the unit is unplugged while the diag LED is still flashing, the AirStation may be damaged.
   
   
   
5. Proceed to next step, "Firmware Version Confirmation".
   
   

Firmware Version Confirmation

1. To open the setup screen, refer to steps 1 to 3 of "How to update the firmware" above.
   
   
2. To see Router Information, please click the "Status" tab at the top of the screen.
   
   
3. Confirm that the firmware version is "build 30356".
   
   
   
   

Version History

build 30356

Bug Fixes

1. Fixed the WPA/WPA2's security vulnerabilities.
2. Fixed the dnsmasq's vulnerabilities（VU#973527）.
3. Fixed the Samba's vulnerabilities（CVE-2017-15275）.

The differences between settings from the previous version are listed below.

1. Removed "Summer Time(DST)" option. To set summer time(DST), configure "country-selection".
2. Removed "vtysh OSPF BGP RIP router" from the "Advanced Routing" options.
3. Removed the [Auto-Refresh] button located on [Setup]-[Networking]-[Current Bridging Table].
4. Removed "RADIUS" from "Wireless Security Mode" options.
5. Options for the AOSS button functions were moved to [Services]-[AOSS Button Function].
6. Removed "XBOX Kaid" option.
7. Removed "My Ad Network" option.
8. Removed "Optimize for Gaming" option from "QoS Settings".
9. The setting for IPv6 was moved to [Setup]-[IPv6].
10. Removed "PPTP Status" from the "Wireless Status" status list.
11. Removed "DHCP Server" from the "System Information" status list.

v24SP2-MULTI (06/03/12) std - build 19154d

Bug Fixes

1. Fixed the Samba vulnerability CVE-2017-7494.

v24SP2-MULTI (06/03/12) std - build 19154c

Bug Fixes

1. Security update for samba vulnerability.

v24SP2-MULTI (06/03/12) std - build 19154b

Bug Fixes

1. Updated OpenSSL to 0.9.8zb to fix CVE-2014-0224 and CVE-2014-5139 vulnerabilities.

v24SP2-MULTI (06/03/12) std - build 19154.

     [Bug Fixes]

1. Fixed issue with dropped packets during broadcasting.
2. Added support for Brazilian and Portuguese.

v24SP2-MULTI (04/25/12) std - build 19152.

     For wireless regulations, build 19152 (User Friendly F/W Version 1.77 ) will not allow the firmware to revert to older versions.

     [New features]

1. Added South America wireless regulatory support
2. Added btrfs and xfsprogs support.
3. Added btrfs and ext4 support.
4. Increased LCP interval from 3 to 10 seconds for PPPoE, stabilizing PPPoE connections on bad quality connections.
5. Now allow QoS for openvpn tunnels.
6. Inactive wireless devices are cleared from the list in the GUI.
7. Wireless site survey shows frequency.
8. Added new QoS mechanism.
9. Introduction of new high performance Ethernet driver.
10. Switch to ATH9k based wireless driver
11. Kernel upgrade to version 3.2.

     [Bug Fixes]

1. Disabled promiscous mode on wireless bridge which causes a big performance bottleneck.
2. Added wireless performance optimization.
3. Added wireless beacon fixes.
4. Added upstream/dowmstream shaping for PPPoE server (using radius attributes).
5. Increase wireless bridging performance.
6. Sped up boot time and fixed b-only mode.

v24SP2-MULTI (10/31/11) std - build 17798 Alpha

V24-SP2 build 16783 - Alpha

     Original release